Lite 36 Single Chan PIX
Moderators: zaphod_phil, Daviedawg, Graydon, CurtissRobin, colossal
-
- Occasional poster
- Posts: 375
- Joined: Sat 10/29/05 2:00 am
- Location: Vancouver, WA
- Contact:
- brownnote
- Frequent poster
- Posts: 997
- Joined: Wed 05/04/05 2:00 am
- Location: CA
- Contact:
Yes, good point.zaphod_phil wrote:Don't you change the speaker tapping on the OT as well, to up the load impedance to 8k?
I'm still trying to get used to the sight of an amp with twice as many tubes in the power amp as in the preamp.
I know what you mean.
0 x
Remember kids...Always adjust for minimum smoke!
- stratwrassler
- Occasional poster
- Posts: 149
- Joined: Mon 05/08/06 2:00 am
- Location: Austin
Sweeeeeet....
Ah, man, that is sooo sweet.
I've been wondering if I could build a 4 x el84 amp into my blank 5E3 size chassis, and this looks like a definite yep.
Peace,
Rico
I've been wondering if I could build a 4 x el84 amp into my blank 5E3 size chassis, and this looks like a definite yep.
Peace,
Rico
0 x
On an eternal quest for gruv and tone.
- stratwrassler
- Occasional poster
- Posts: 149
- Joined: Mon 05/08/06 2:00 am
- Location: Austin
Not that I recommend it...
Gee, if you ran all the el84's parallel SE class A, you could have 4 x as many finals as preamp tubes, heh.zaphod_phil wrote:....
I'm still trying to get used to the sight of an amp with twice as many tubes in the power amp as in the preamp.
Peace,
Rico
0 x
On an eternal quest for gruv and tone.
- steelerfan88
- Newbie
- Posts: 33
- Joined: Sun 10/18/15 8:48 pm
-
- Senior Amp Tech
- Posts: 1169
- Joined: Sat 08/09/08 2:00 am
- Location: Columbia River Gorge, Oregon Side
Re: Lite 36 Single Chan PIX
Whoa! Dead thread resurrection time! I don't think there are any in the Downloads but if you check the Gallery I know of at least one under Chris's 18 and 36 TMB. Couldn't tell you anything about 'em though. Brownnote's gallery doesn't appear to have any 36W photos. Best bet: browse. I know several of these were built by members.
KennyO
KennyO
0 x