aarrrrggggghhhhh!!!!!!!!!!!!!!!!!!!1

[twl]

i was having troubles with low output but do to my error not goin to get into detail but im powering up with no output and no voltages across tubes any suggestions i was thinkin the 32ufx2 can cap

[Alexo]

Ehh try the fuse? Deep breaths?

Where do you, and where do you not see voltage?

[loyjdockery]

I've had the fuse blow a couple times on me. Both times it was because I just wired up something wrong in the amp. It might be a wrong value resistor, a bad tube, a miswire. As long as you don't see smoke coming out of your trannies, you're at least not getting into a costly situation.

[twl]

i had it working and was testing voltages and i accidently hit 2 tube prongs and shorted somthin it still fires up but no output

[wavey63]

I just had that same thing happen to me. It was the B+ fuse that got toasted. Get a new one( of a bunch just in case) and be on your way!!

[what_wires]

it sure is hard to read posts that dont use and punctuation or capitalization you might get more responses if you made your posts easier to read this is just a suggestion