Please summarize changes needed to use 2 x EL34
Moderators: zaphod_phil, Daviedawg, Graydon, CurtissRobin, colossal
-
- Unrated
- Posts: 17
- Joined: Tue 01/27/09 2:00 am
- Location: Unknown
Please summarize changes needed to use 2 x EL34
Hey Ya'll... thank you for your help in advance... Can anyone please help me identify which changes should be made to accommodate a pair of cathode biased EL34's instead of the Quad of EL84's? I am using a standard set of 36 watt Transformers from Heyboer.. I have read the threads... a lot of info is around... just a lot of confusing bits of information though... so, any helpful point by point suggestions would be super cool...
Zaphod Phil... Anyone... Help please.. Thanks again...
Zaphod Phil... Anyone... Help please.. Thanks again...
You do not have the required permissions to view the files attached to this post.
0 x
-
- Unrated
- Posts: 17
- Joined: Tue 01/27/09 2:00 am
- Location: Unknown
Re: Please summarize changes needed to use 2 x EL34
Oh,... I should add that I have broken the channels back out to be separate.... Like a standard 18 watt TMB... with no NFB loop/switch... Just in case that matters... Thank you...
0 x
- menger
- Occasional poster
- Posts: 431
- Joined: Sun 09/21/08 2:00 am
- Location: Unknown
Re: Please summarize changes needed to use 2 x EL34
Look over at the weber forum at the phat ass amp there building, it a lite IIb with different powertubes I did a few myself with kk66 el34 6550 just a few resistors in the pi is all mark
0 x
-
- Unrated
- Posts: 17
- Joined: Tue 01/27/09 2:00 am
- Location: Unknown
Re: Please summarize changes needed to use 2 x EL34
Do you have a link to something that shows those changes... I can't seem to find what you have mentioned... Thank you...
0 x
- scottva59
- Newbie
- Posts: 85
- Joined: Tue 07/22/08 2:00 am
- Location: Northern VA
- Contact:
Re: Please summarize changes needed to use 2 x EL34
Here is my post from the "hear it" section, it covers the Phat Ass 16 (6v6) or 26 (EL34) versions. Let us know how it turns out!
Scott
http://www.18watt.com/forums/viewtopic.php?f=13&t=23052" onclick="window.open(this.href);return false;
Scott
http://www.18watt.com/forums/viewtopic.php?f=13&t=23052" onclick="window.open(this.href);return false;
0 x