new build 36lite with vvr
Moderators: CurtissRobin, colossal, zaphod_phil, Daviedawg, Graydon
-
- Occasional poster
- Posts: 301
- Joined: Tue 03/05/13 5:28 pm
Re: new build 36lite with vvr
Another highlighter test done. No lightbulb moments. Haha. Sob.
Things maybe worth mentioning.
The resistor from a-b is not 1k but 1.5k.
V2 is grounded with the pre amp and inputs, not the power amp.
The screen from the mains side of the PT is grounded through a fuse to the star ground. The ct for 275v supply to the rectifier is also grounded there.
I honestly can't think of anything else im unsure of or haven't checked. I know I know, there must BE something...
Thanks for all your patience, mine is wearing a little thin with myself...
Things maybe worth mentioning.
The resistor from a-b is not 1k but 1.5k.
V2 is grounded with the pre amp and inputs, not the power amp.
The screen from the mains side of the PT is grounded through a fuse to the star ground. The ct for 275v supply to the rectifier is also grounded there.
I honestly can't think of anything else im unsure of or haven't checked. I know I know, there must BE something...
Thanks for all your patience, mine is wearing a little thin with myself...
0 x
- JMPGuitars
- Super Duper Admin
- Posts: 3955
- Joined: Tue 09/18/12 8:00 pm
- Location: South Central, MA
- Contact:
Re: new build 36lite with vvr
What does this mean? You need to be specific so we can help you. The B+ rises? To what? Does it stabilize? Or does it count to infinity (and beyond)?
Ignore the hum for a moment and get useful information.
0 x
'I installed a skylight in my apartment yesterday... The people who live above me are furious.' - Steven Wright
Modern Ground Schemes
Soldering Technique
B+ Voltage Reduction
Amplifier Tools & Parts Info
Web Design: DolceVittoria.com
Guitars / Amps / Effects: JMPGuitars.com
(anti)Social: Facebook · Instagram
Items for Sale
Modern Ground Schemes
Soldering Technique
B+ Voltage Reduction
Amplifier Tools & Parts Info
Web Design: DolceVittoria.com
Guitars / Amps / Effects: JMPGuitars.com
(anti)Social: Facebook · Instagram
Items for Sale
-
- Occasional poster
- Posts: 301
- Joined: Tue 03/05/13 5:28 pm
Re: new build 36lite with vvr
Sorry, I get nervous when it starts humming and heating like it's going to blow up in my face...
Weirdly, it's behaving a little different this morning.
With standby off I have 230vac and 310vdc rectified at the standby switch.
Standby on
B+ 354
P3 11.6
P7 350
P9 325
Settling to
B+ 352
P3 12.2
P7 345
P9 322
That's after about twenty seconds when it all feels quite hot and hummy so I switch off. Volume is at 0. It could be normal hot but I don't know.
Sorry if this is very tedious for you guys, I really appreciate the help.
Weirdly, it's behaving a little different this morning.
With standby off I have 230vac and 310vdc rectified at the standby switch.
Standby on
B+ 354
P3 11.6
P7 350
P9 325
Settling to
B+ 352
P3 12.2
P7 345
P9 322
That's after about twenty seconds when it all feels quite hot and hummy so I switch off. Volume is at 0. It could be normal hot but I don't know.
Sorry if this is very tedious for you guys, I really appreciate the help.
0 x
- Bieworm
- Verbose Moderator
- Posts: 2287
- Joined: Mon 02/10/20 8:24 am
- Location: Belgium
Re: new build 36lite with vvr
Those numbers mean your power tubes are biased at 106.7%. That's not a disaster, but that is also why we generally put a 180R cathode resistor in there. That will drop the bias. We aim for 85%, give or take... 100% is ok, but 85 is better for tube life. It's a cathode biased amp and it's generally accepted that 100% is no problem.
can you make a recording of the process from silent to excessive hum? The hum will decrease when it's biased to 80-90% for sure, but the hum you have may have another cause...making you chase your tail at the power section.
can you make a recording of the process from silent to excessive hum? The hum will decrease when it's biased to 80-90% for sure, but the hum you have may have another cause...making you chase your tail at the power section.
0 x
"THIS should be played at high volume..preferably in a residential area"
-
- Occasional poster
- Posts: 301
- Joined: Tue 03/05/13 5:28 pm
Re: new build 36lite with vvr
Thanks bieworm, I'll try to get something and post it, will the numbers look better when I have four tubes?
Can I ask which Ukrainian tube guy you used and I'll order a bunch. There's actually a guy in Ireland selling NOS reflektor military grade but 4 is going to be over a hundred euro and then I'd probably blow one up...
Can I ask which Ukrainian tube guy you used and I'll order a bunch. There's actually a guy in Ireland selling NOS reflektor military grade but 4 is going to be over a hundred euro and then I'd probably blow one up...
0 x
-
- Occasional poster
- Posts: 301
- Joined: Tue 03/05/13 5:28 pm
Re: new build 36lite with vvr
Also I only have am 8 ohm speaker and no 4 ohm output option until I finish the cab the 8 ohm speaker is in the 8 ohm output, is that affecting things/ voltages? I could hook up two loose 8 ohm speakers to give the correct impedance but would they get damaged just lying on the table?
0 x
- Bieworm
- Verbose Moderator
- Posts: 2287
- Joined: Mon 02/10/20 8:24 am
- Location: Belgium
Re: new build 36lite with vvr
I doubt the numbers will change significantly with 4 tubes, but they will to some degree.chaliapin wrote: ↑Tue 01/17/23 6:34 amThanks bieworm, I'll try to get something and post it, will the numbers look better when I have four tubes?
Can I ask which Ukrainian tube guy you used and I'll order a bunch. There's actually a guy in Ireland selling NOS reflektor military grade but 4 is going to be over a hundred euro and then I'd probably blow one up...
I bought mine at Etsy (Radiotubeshop)
Regarding hum inducers... I notice you have the B+ (DC) in parallel with a bunch of twisted AC wires (heaters, PT primary,..)
Somebody correct me if I'm wrong, but I avoid AC and DC wires in parallel. I don't know if that is a problem, since this is not a signal wire...
0 x
"THIS should be played at high volume..preferably in a residential area"
- Bieworm
- Verbose Moderator
- Posts: 2287
- Joined: Mon 02/10/20 8:24 am
- Location: Belgium
Re: new build 36lite with vvr
no damaging there, but it will sound like crap when not in a cabchaliapin wrote: ↑Tue 01/17/23 6:49 amAlso I only have am 8 ohm speaker and no 4 ohm output option until I finish the cab the 8 ohm speaker is in the 8 ohm output, is that affecting things/ voltages? I could hook up two loose 8 ohm speakers to give the correct impedance but would they get damaged just lying on the table?
0 x
"THIS should be played at high volume..preferably in a residential area"
-
- Occasional poster
- Posts: 301
- Joined: Tue 03/05/13 5:28 pm
Re: new build 36lite with vvr
So wall voltage up 6v to 236vac this afternoon. Here's the latest with two 8 ohm speakers in series into the 8 ohm socket. Hum seemed to come later and quieter, unaffected by turning volume up full with no input. Voltages now
B plus 357
P3 12.35
P7 354
P9 323
I'll try to get the cab finished to I can get the speakers into it.
B plus 357
P3 12.35
P7 354
P9 323
I'll try to get the cab finished to I can get the speakers into it.
0 x
- Bieworm
- Verbose Moderator
- Posts: 2287
- Joined: Mon 02/10/20 8:24 am
- Location: Belgium
Re: new build 36lite with vvr
That means you have the bias at 110.8%chaliapin wrote: ↑Tue 01/17/23 8:12 amSo wall voltage up 6v to 236vac this afternoon. Here's the latest with two 8 ohm speakers in series into the 8 ohm socket. Hum seemed to come later and quieter, unaffected by turning volume up full with no input. Voltages now
B plus 357
P3 12.35
P7 354
P9 323
I'll try to get the cab finished to I can get the speakers into it.
You will have to get some extra resistors for the cathode biasing. 180R, 220R,... prepare for that. The amp will get more quiet when the bias is set properly. But I think that regards more to the hiss instead of the hum.
You should also get some 5V 5W zener diodes to be able to knock down the B+ to 345V. But I would do these adjustments when you have the 4 power tubes in there.
0 x
"THIS should be played at high volume..preferably in a residential area"
-
- Occasional poster
- Posts: 301
- Joined: Tue 03/05/13 5:28 pm
Re: new build 36lite with vvr
Ok I've ordered and resistors. Can I play it as it is now when ive the 16 ohm speaker load sorted or is something gonna blow?
0 x
- Bieworm
- Verbose Moderator
- Posts: 2287
- Joined: Mon 02/10/20 8:24 am
- Location: Belgium
Re: new build 36lite with vvr
If it was 100% I’d say go for it. But at 111% I’m advising against it. Don’t you have an extra 5W resistor in the range of 33 to 82 ohm? You could put them in series and be safe.
I know vox amps are often biased over 100% dissipation, but they are also notorious on catching fire and blown transformers.
I know vox amps are often biased over 100% dissipation, but they are also notorious on catching fire and blown transformers.
0 x
"THIS should be played at high volume..preferably in a residential area"
-
- Occasional poster
- Posts: 301
- Joined: Tue 03/05/13 5:28 pm
Re: new build 36lite with vvr
Im guessing I should get this amp working 100 percent before messing with adding the MV?
0 x
- Bieworm
- Verbose Moderator
- Posts: 2287
- Joined: Mon 02/10/20 8:24 am
- Location: Belgium
Re: new build 36lite with vvr
There’s no harm in doing the ‘simple stupid master volume mod’ at this point…
0 x
"THIS should be played at high volume..preferably in a residential area"
-
- Occasional poster
- Posts: 301
- Joined: Tue 03/05/13 5:28 pm
Re: new build 36lite with vvr
You suggested the type 2MV to me before pretty sure I have the components or is it a bit in depth at this point?
0 x
- Bieworm
- Verbose Moderator
- Posts: 2287
- Joined: Mon 02/10/20 8:24 am
- Location: Belgium
Re: new build 36lite with vvr
Better begin with the 1M pot type. It’s easier and you can practice.
0 x
"THIS should be played at high volume..preferably in a residential area"
-
- Occasional poster
- Posts: 301
- Joined: Tue 03/05/13 5:28 pm
Re: new build 36lite with vvr
Yeah, I'm clearly not ready to move up to level 2, simple stupid is where I'm at...
2 x
- Bieworm
- Verbose Moderator
- Posts: 2287
- Joined: Mon 02/10/20 8:24 am
- Location: Belgium
Re: new build 36lite with vvr
It’s a process.. we’ve all been there
1 x
"THIS should be played at high volume..preferably in a residential area"
-
- Occasional poster
- Posts: 301
- Joined: Tue 03/05/13 5:28 pm
Re: new build 36lite with vvr
So ive been working on my cab waiting for bits to arrive.
Can anyone explain to me WHY exactly my b plus voltage and dissipation are too high? Are these two issues linked? My wall voltage seems normal and the rectified voltage at the standby switch before switching on is significantly lower than when the amp is running. I'll really do my best to understand any answers provided to me...
Thanks all.
Can anyone explain to me WHY exactly my b plus voltage and dissipation are too high? Are these two issues linked? My wall voltage seems normal and the rectified voltage at the standby switch before switching on is significantly lower than when the amp is running. I'll really do my best to understand any answers provided to me...
Thanks all.
0 x
- JMPGuitars
- Super Duper Admin
- Posts: 3955
- Joined: Tue 09/18/12 8:00 pm
- Location: South Central, MA
- Contact:
Re: new build 36lite with vvr
They are related. My guess is you're using a classic style 290-0-290 transformer. Except that those classic specs were expecting lower wall voltage. So the result is that you're somewhere between 300-0-300 to 310-0-310 depending on how high your wall voltage is.chaliapin wrote: ↑Thu 01/19/23 3:30 pmSo ive been working on my cab waiting for bits to arrive.
Can anyone explain to me WHY exactly my b plus voltage and dissipation are too high? Are these two issues linked? My wall voltage seems normal and the rectified voltage at the standby switch before switching on is significantly lower than when the amp is running. I'll really do my best to understand any answers provided to me...
Thanks all.
To combat that higher voltage, we use a higher impedance cathode resistor, and Zener dropping diodes for B+. That gets you into better specs for safety and better tone.
Thanks,
Josh
0 x
'I installed a skylight in my apartment yesterday... The people who live above me are furious.' - Steven Wright
Modern Ground Schemes
Soldering Technique
B+ Voltage Reduction
Amplifier Tools & Parts Info
Web Design: DolceVittoria.com
Guitars / Amps / Effects: JMPGuitars.com
(anti)Social: Facebook · Instagram
Items for Sale
Modern Ground Schemes
Soldering Technique
B+ Voltage Reduction
Amplifier Tools & Parts Info
Web Design: DolceVittoria.com
Guitars / Amps / Effects: JMPGuitars.com
(anti)Social: Facebook · Instagram
Items for Sale