Holy Mullards, tubeman! For real?

Tube-specific discussions

Moderators: zaphod_phil, CurtissRobin, colossal

Post Reply
novemberrain
Verbose poster
Verbose poster
Posts: 1191
Joined: Sat 01/22/05 2:00 am

Post by novemberrain »

Either they're real or they're the best fakes I've ever seen! :lol:
0 x

User avatar
Turmoil
Frequent poster
Frequent poster
Posts: 517
Joined: Wed 01/11/06 2:00 am
Location: Seattle

Post by Turmoil »

In the voice of Homer Simpson. Mmmm Mullard Pentodes :P
0 x
"Relax in the safety of your own delusions."

J.R. Bob Dobbs

JoeV
Occasional poster
Occasional poster
Posts: 195
Joined: Tue 08/16/05 2:00 am
Location: MD - USA
Contact:

Post by JoeV »

Nope. Fakes. Shoot me an email and I'll send you my address so I can dispose of them properly for you. Damn shame, man.... :twisted:
0 x
Joe V.
www.amplates.com
Custom Faceplates for DIY Guitar Amplifiers
...and Photo Grille Cloth, too!

User avatar
BBQLS1
Old timer, Never stops talking
Old timer, Never stops talking
Posts: 2104
Joined: Thu 11/17/05 2:00 am
Location: Red Stick Louisiana!

Post by BBQLS1 »

What did you buy?
0 x
Don´t ask me what I think of you. I might not give the answers you want me to.

User avatar
BBQLS1
Old timer, Never stops talking
Old timer, Never stops talking
Posts: 2104
Joined: Thu 11/17/05 2:00 am
Location: Red Stick Louisiana!

Post by BBQLS1 »

deleted
0 x
Don´t ask me what I think of you. I might not give the answers you want me to.

User avatar
Turmoil
Frequent poster
Frequent poster
Posts: 517
Joined: Wed 01/11/06 2:00 am
Location: Seattle

Post by Turmoil »

That ones labeled Supergroup right? Oh man those things sound friggin' sweet! Congrats!
0 x
"Relax in the safety of your own delusions."

J.R. Bob Dobbs

Chappy
Occasional poster
Occasional poster
Posts: 247
Joined: Sun 05/01/05 2:00 am
Location: Chicoutimi Canada

Post by Chappy »

If the resistor has 318mv across it then it is passing 318/6=53ma. If all four of the cathodes are tied in parallel, and assuming that they are all matched then each tube is only passing 53/4=13.25ma through its cathode.

The power dissipation of each tube (for both the screen and the plate) is then only P=I*R which is .01325A*619V=8.2Watts. So your tubes should be fine assuming that I am understanding your explanation of the hookup.

Chappy
0 x

Post Reply