Opinions/knowledge of Russian 6P3S

Tube-specific discussions

Moderators: CurtissRobin, zaphod_phil, rock_mumbles

How do you rate Russian 6P3S?

don't know
11
52%
wouldn't touch them
1
5%
solid-reliable but nuthin' fancy
1
5%
great value for $$
6
29%
sonic heaven
2
10%
 
Total votes: 21

User avatar
zaphod_phil
Builder, Admin
Builder, Admin
Posts: 14812
Joined: Wed 03/19/03 2:00 am
Location: Rush Country

Postby zaphod_phil » Sat 03/05/11 11:18 pm

The 6p3s, no suffix, is usually a straight copy of the 6L6G and was supplied into Western markets by Brimar as the 6L6GT (T = straight envelope as opposed to "coke bottle"). Don't try to push them too hard and they work OK. After deep thought, I would say 12W is probably the limit, but I'm pushing my addled brain there.
Sounds like you're confusing 6V6 and 6L6 specs there. A clone of a 6L6GT should be good for 19W dissipation.
0 x

dotfret
Frequent poster
Frequent poster
Posts: 922
Joined: Wed 09/29/04 2:00 am
Location: East Yorkshire

Postby dotfret » Sun 03/06/11 10:41 am

Not exactly - I'm thinking more along the lines of "it depends on the factory", and also of a B&O hifi amp I once had that ran 6L6 at 12W. There is always the possibility that a factory was making the lower-rated 6L6 with a glass envelope. The 6L6 / 6p3 was the original design, and had a metal envelope - I have never seen a russian one, but that is the design the US gave the Russians.

The 6L6GT and 6p3s I have seen were made in St Petersburg, and they are likely to work like you say, but some eBay sellers tend to use pictures as "illustrative" and send you anything they can get. The older the stuff they find, the more likely it is to have a lower power rating.
0 x

User avatar
zaphod_phil
Builder, Admin
Builder, Admin
Posts: 14812
Joined: Wed 03/19/03 2:00 am
Location: Rush Country

Postby zaphod_phil » Sun 03/06/11 2:05 pm

...and also of a B&O hifi amp I once had that ran 6L6 at 12W. ...
I would guess that was something they were doing to keep the valve running at maximum linearity and infinitesimally low THD. 12W is even low for a 6V6.
0 x

User avatar
tubeswell
Newbie
Newbie
Posts: 28
Joined: Wed 07/01/09 2:00 am
Location: Wellington NZ

Postby tubeswell » Mon 03/28/11 5:23 am

FWIW, one of the contributors at the ampage forum provided a little bit of further info on the 6P3S (if anyone else is curious about it). (He is a yankee now living in St Petersburg from what I gather):

http://music-electronics-forum.com/t242 ... post208036
0 x

kleuck
Occasional poster
Occasional poster
Posts: 253
Joined: Sun 11/18/07 2:00 am
Location: France

Postby kleuck » Fri 09/02/11 6:48 pm

6P3S are indeed close to 6L6 GT, are rated 20,5 watts, and i use some in A class under 330 volts and 96% max dssipation with no problem.
0 x


Return to “Tube Talk”

Who is online

Users browsing this forum: No registered users and 2 guests