El84 pinout breakdown?

Tube-specific discussions

Moderators: CurtissRobin, zaphod_phil, rock_mumbles

User avatar
doubtingthomas
Newbie
Newbie
Posts: 47
Joined: Tue 10/18/05 2:00 am
Location: Colorado Springs

El84 pinout breakdown?

Postby doubtingthomas » Sun 12/11/11 1:12 am

I know I should know this, but more often than not I just find myself wiring and assembling amps rather than brushing up on fundamentals. I'm trying to figure out the pinouts of an EL84 and cannot find a diagram anywhere. Trying to rewire sockets for a 6v6 design for conversion for dual bias power tubes. Could someone direct me to a pinout diagram please? This would be much appreciated.
0 x

katopan
Frequent poster
Frequent poster
Posts: 863
Joined: Mon 12/10/07 2:00 am
Location: Melb, Aust
Contact:

Postby katopan » Sun 12/11/11 2:32 am

Search for "EL84 datasheet". Every data sheet will have the pinout on it.
0 x

Daviedawg
Superior Amp Tech
Superior Amp Tech
Posts: 496
Joined: Fri 01/08/10 2:00 am
Location: Scotland

Postby Daviedawg » Sun 12/11/11 3:06 am

I have printed and kept datasheets for all the valves I use or think I may use. I often find a need to refer to them.

Dd
0 x

rock_mumbles
Senior Amp Tech
Senior Amp Tech
Posts: 826
Joined: Mon 04/21/08 2:00 am
Location: Podunk, Idaho
Contact:

Postby rock_mumbles » Sun 12/11/11 10:00 am

This layout has both EL84's and 6V6's and has the pin conversion:

http://www.rh-tech.org/public/18-Watt/1 ... ut_192.pdf
0 x

User avatar
zaphod_phil
Builder, Admin
Builder, Admin
Posts: 14812
Joined: Wed 03/19/03 2:00 am
Location: Rush Country

Postby zaphod_phil » Sun 12/11/11 8:46 pm

I use Duncan's TDSL as a handy reference for all tube pin diagrams and summary specs.

http://tdsl.duncanamps.com/tubesearch.php
0 x

User avatar
doubtingthomas
Newbie
Newbie
Posts: 47
Joined: Tue 10/18/05 2:00 am
Location: Colorado Springs

Postby doubtingthomas » Mon 12/12/11 7:03 pm

Awesome! Thanks for the info guys. Much appreciated.
0 x


Return to “Tube Talk”

Who is online

Users browsing this forum: Bing [Bot] and 2 guests