Page 7 of 8

Posted: Fri 09/01/06 3:33 pm
by BBQLS1
geekmacdaddy wrote:Done.
Me Too.

Posted: Mon 09/04/06 7:46 am
by jac
As I've now been delving into more and more of this forum. I've noticed the Mark Durham raffle. It's very noble what everyone is doing, and Mark's life will obviously live on thru everyone that visits and uses this site. I have very little money and for me to do anything music related, I sell gear I've accumulated over the years. Iwas going to buy a kit by selling off gear that I mentioned in another thread, even though I had already bought this turret board, but I think now I'd rather build with the parts I have on hand, and give the $100.00 your asking for tickets. I'm just going to give the money though. So I guess I better get started with pics.
Thank you again for this forum, My thoughts and prayers go out to Mr. Durham's family.
Jac

Posted: Tue 09/05/06 11:03 am
by dartanion
Jac,

That's a very nice gesture. Do what you can.

UPDATE 9-5-06!!!!!!
*********************************************************
Wiggle sent me shipping notice, so the JTM45 Chassis is on the way!!! We're gaining momentum folks!!!

Posted: Tue 09/12/06 12:38 pm
by dartanion
The JTM45 arrived yesterday, and it looks really nice!!!

I should have it all put together soon. I'll try to get some photos of this and Paul Ruby's build tonight....if I can sneak away from remodeling work for a few minutes. :?

Posted: Tue 09/12/06 5:51 pm
by sgtoverdrive
dart your tubes for the raffle will ship out this week someone will have to supply rectifiers they are on order but im cleaned out l sgt od ...ps mr huss yours are on the launch pad as well.the sgt knows that dart and the huss man will build in accordance with military regulations .go get em boys.im sure they will live up to the fine tubes im sending.i hope mark knows how much he is missed and i should live to have such freinds sgt od

Posted: Tue 09/12/06 5:55 pm
by dartanion
Sarge-

Thanks a ton!!!

These amps will take no prisoners with your glass in 'em!!!

family update

Posted: Wed 09/20/06 12:25 am
by jtmjtm45
Ive heard alot about the raffle ,but how are the girls doing.Wasnt one of them still in the hospital thanks :?:

Posted: Mon 09/25/06 11:37 am
by Dana-L
What's the latest word on the fundraising effort for the Durham family?

Any information on the prize list and projected date of the raffle?

Very best regards,

-Dana

Posted: Mon 09/25/06 12:00 pm
by dartanion
We are shooting for all builds to be completed by the end of this month (Sept. 06), and then holding the drawing on Oct. 31. This should give us ample time to promote and get more donations as we will have photos of the builds and other prizes.

I believe that we are no longer calling it a raffle for legal reasons, thus we are accepting donations to the Mark Durhum Memorial Fund, which will be holding a prize give away on Oct. 31 for those who have been so kind as to donate.

I'll shoot a message to S2 to get an update on the girls. Last I heard was that they were headed back to Texas and that things were looking up.

Posted: Tue 09/26/06 11:58 am
by dartanion
UPDATE
*******************************************************

Tubes arrived from the Sarge for Paul Ruby's build and head cab is on the way from Anthony (Reason). Should be a beaut :D

Posted: Tue 09/26/06 12:12 pm
by billv
Wooohoooo! :)

Posted: Tue 09/26/06 9:45 pm
by markh
I'm just waiting on some tube sockets (kindly donated by allynmey), and with luck I'll be able to hit the deadline (18watt classic build). :D

--mark h

Posted: Tue 09/26/06 11:58 pm
by allynmey
Mark, Shipped yesterday. you should have everything tomorrow. :D

Allyn

Posted: Wed 09/27/06 12:13 am
by dartanion
Mark,

Did you post a copy of that pic in the Gallery?

HOLY CRAP DUDE 8O That's beautiful!!!!!!! 8O 8O 8O 8O

I gotta take some shots of Paul's build and the JTM45 (which I haven't even unpacked yet :oops: ). Paul is an artist as well. His build is killer!!!!

Wiggle, what exactly was Mark Durham's role in the life of that JTM45?

Southbay, are you still down to donate some of those wicked Scumbacks?

What I would like to do is maybe get together with some of the local forum guys and put down some clips of these 2 builds that we can post here and get a bunch of photos. Jim can bring the Epi LP he's so kindly donating, other's bring the guitars and record some nice tasty tidbits.

Posted: Wed 09/27/06 10:00 am
by Dana-L
dartanion wrote:We are shooting for all builds to be completed by the end of this month (Sept. 06), and then holding the drawing on Oct. 31. This should give us ample time to promote and get more donations as we will have photos of the builds and other prizes.

I believe that we are no longer calling it a raffle for legal reasons, thus we are accepting donations to the Mark Durhum Memorial Fund, which will be holding a prize give away on Oct. 31 for those who have been so kind as to donate.

I'll shoot a message to S2 to get an update on the girls. Last I heard was that they were headed back to Texas and that things were looking up.
Thanks for the update, man.

It sounds like there will be quite the fine collection of prizes.

You guys are great!

-Dana

Posted: Wed 09/27/06 11:29 am
by markh
dartanion wrote:Mark,

Did you post a copy of that pic in the Gallery?

...That's beautiful!...
Not yet, I'm taking a bunch of photos as I go, with the intention of documenting the whole build process.

Note that it's built on a piece of gen-u-ine RS tagboard, which Mark D sent me 'just because!' :) :cry:

Note also the unusual PI plate resistor config. Two 1/4 watt 51k ohm carbon comps in series per anode. Twice the mojo! :lol:

Thanks for the kind words.

--mark h

Posted: Fri 09/29/06 12:04 pm
by dartanion
UPDATE

**********************************************************

Cab arrived from Reason Amplification yesterday for Paul's build and she's a beauty!!! I will be assembling it this weekend and taking lots of photos. I hope to have the JTM45 all done here soon as well.

I was thinking that we should do some sort of badge for Paul's build that will denote that this was part of the Mark Durham give away.

NitroLiq-
Are you still game for a design for this baby? Maybe a special tube chart (EF86/Trem) and a badge for the front of the cab (nothing too gaudy though).

Also, anyone want to donate a Marshall style handle and some feet for the JTM45 head cab? If so, please shoot me an email.[/b]

Posted: Sat 09/30/06 9:39 pm
by NitroLiq
Dart, Just PM me with the exact specs for the tube chart (size and info) as well as the badge...the badge is a nameplate, correct? What do you want it to say? Also, it'll be helpful to see pics of the amp so I can decide on a good type treatment.

Thanks,
Pete

P.S. Don't forget to let me know what format you want the final files in.

Posted: Sun 10/01/06 8:11 am
by wiggle
dartanion wrote: Wiggle, what exactly was Mark Durham's role in the life of that JTM45?

S
He re-biased it for me. When I changed to the GT tubes, I couldnt settle on a good bias point and so he did. He also talked me into opening up the NFB loop a little. As youll notice I have it way choked back. I have always had trouble with the Marshall treble/presence. While he wouldnt directly do this as he didnt want to invade into my build he kindly mentioned it to me, and reminded me that everything would settle down tone-wise with a few hours of hard playing. He gave me his JTM 45 that had his favorite mods on it to dig into. I changed a couple of values around v1 to emulate one of his mods.
I honestly cant remember everything that was done. Because the amp has sounded so cool for 2-3 years, and I really havent touched it lately.

I hope someone really enjoys this amp.
Travis

Posted: Mon 10/02/06 11:49 am
by dartanion
NitroLiq,

How do I PM you? What's your email addy?

Wiggle,

Cool beans! The story is becoming more clear.

I finally unwrapped the JTM45 and everything looks good, except the rectifier was crushed in shipping :cry: I'll see if I have a suitable replacement.

I also put Paul's build into the can supplied by Reason Amplification and it is beautiful. I took a bunch of photos and will post them tonight.

I've got a little more work to do on the cabs for the JTM45, but should have it completed by this coming weekend. I have just been way too busy for words.

I am also planning on having a good buddy of mine who is a phenominal player come by this weekend to record some clips of these babies!!!