1974x PT replacement

General Tech Discussion - Anything amp-ish goes!

Moderators: CurtissRobin, colossal, zaphod_phil, Daviedawg, Graydon

User avatar
JMPGuitars
Super Duper Admin
Super Duper Admin
Posts: 3106
Joined: Tue 09/18/12 8:00 pm
Location: South Central, MA
Contact:

Re: 1974x PT replacement

Post by JMPGuitars »

80% is excellent, assuming all the values are correct. I wouldn't change it. Don't arbitrarily change stuff without good reason.

Thanks,
Josh
0 x
'I installed a skylight in my apartment yesterday... The people who live above me are furious.' - Steven Wright

Modern Ground Schemes
Soldering Technique
B+ Voltage Reduction


Web Design: DolceVittoria.com
Guitars / Amps / Effects: JMPGuitars.com
(anti)Social: Facebook · Instagram
Items for Sale

foreverstrung
Newbie
Newbie
Posts: 35
Joined: Sun 10/10/21 5:53 pm

Re: 1974x PT replacement

Post by foreverstrung »

Ya, I'm not going to change anything. Numbers are correct. I triple checked. Put the amp back together 100% and put it thru the motions for about an hour. Sounds fantastic. appreciate all the help
3 x

geoff 1965
Verbose poster
Verbose poster
Posts: 1079
Joined: Mon 01/04/16 3:52 pm

Re: 1974x PT replacement

Post by geoff 1965 »

Well done! glad you are happy with it,I was surprised at the quite low 318 plate voltage and it looks like Marshall aimed at breakup with this design,the stock 91R bias resistor would drop the plate & cathode voltage even more!
1 x

Post Reply