Got my AC30 iron today...
Moderators: zaphod_phil, Daviedawg, Graydon, CurtissRobin, colossal
- WesKuhnley
- Occasional poster
- Posts: 329
- Joined: Thu 11/02/06 2:00 am
- Location: Minneapolis/St. Paul
- Contact:
Got my AC30 iron today...
IT'S ON!
I'll be building the AC30/4 circuit that's in the download section using the "vintage" official Vox iron and my '69 Super Beatle chassis and cab...sweet rocking will soon be in order!
I'll be building the AC30/4 circuit that's in the download section using the "vintage" official Vox iron and my '69 Super Beatle chassis and cab...sweet rocking will soon be in order!
0 x
-
- Newbie
- Posts: 95
- Joined: Mon 09/25/06 2:00 am
- Location: St. Paul, MN
- Contact:
- WesKuhnley
- Occasional poster
- Posts: 329
- Joined: Thu 11/02/06 2:00 am
- Location: Minneapolis/St. Paul
- Contact:
- paulster
- Newbie
- Posts: 44
- Joined: Tue 04/11/06 2:00 am
- Location: London
Re: Got my AC30 iron today...
Where did you get the iron from? I'm after some decent AC30 iron, although I want it in a standup format.WesKuhnley wrote:I'll be building the AC30/4 circuit that's in the download section using the "vintage" official Vox iron
0 x
- WesKuhnley
- Occasional poster
- Posts: 329
- Joined: Thu 11/02/06 2:00 am
- Location: Minneapolis/St. Paul
- Contact:
CE Distrobution. www.cedist.com only the OP and choke are stand up. I chose the 'vintage' Vox iron cause it was the cheapest, not the best. I'm not too hip on spending $500 on MM iron...
0 x
-
- Occasional poster
- Posts: 135
- Joined: Thu 03/30/06 2:00 am
- Location: Halstead, Essex, UK
Cheers for the link but they say they only sell to distributors and tradesmen etc... Shame that. I could be convinced to build an AC30...WesKuhnley wrote:CE Distrobution. www.cedist.com only the OP and choke are stand up. I chose the 'vintage' Vox iron cause it was the cheapest, not the best. I'm not too hip on spending $500 on MM iron...
0 x
- Michael
- Frequent poster
- Posts: 572
- Joined: Thu 05/04/06 2:00 am
- Location: Charleston
- Contact:
I am a vendor. You pay shipping and I'll send em too you.Wicksy wrote:Cheers for the link but they say they only sell to distributors and tradesmen etc... Shame that. I could be convinced to build an AC30...WesKuhnley wrote:CE Distrobution. www.cedist.com only the OP and choke are stand up. I chose the 'vintage' Vox iron cause it was the cheapest, not the best. I'm not too hip on spending $500 on MM iron...
Michael
0 x
-
- Unrated
- Posts: 3
- Joined: Fri 06/02/06 2:00 am
"Vintage" AC-30 xfmrs
These vintage style AC-30 transformers offered by CE are surplus from the Vox AC-30 HW edition amps, made by Schumacher I believe. I've bought a bunch of the sets in the past for some of my own builds and thought I'd mention that I found several of the PTs that buzz. Loose windings and/or laminations that would physically vibrate under loaded conditions. Thankfully, I returned the bad ones for a refund, but it was still a pain in the ass to go through.
Could these have been seconds included with leftovers or possibly just damaged in transit? Beware.
Hopefully I'm not too late with this post.
Could these have been seconds included with leftovers or possibly just damaged in transit? Beware.
Hopefully I'm not too late with this post.
0 x