Half power switch
Moderators: zaphod_phil, Daviedawg, Graydon, CurtissRobin, colossal
- Sully
- Newbie
- Posts: 25
- Joined: Mon 03/19/07 2:00 am
- Location: South New Jersey
Half power switch
I looked, but I couldn't find any info in the repository about adding a half power switch.
Would anyone have a diagram handy, ( for us non-schematic reading newbies), or just some directions.
Would a 6 amp toggle switch be OK in that application ?
Many thanks ...sully
Would anyone have a diagram handy, ( for us non-schematic reading newbies), or just some directions.
Would a 6 amp toggle switch be OK in that application ?
Many thanks ...sully
0 x
- paulster
- Newbie
- Posts: 44
- Joined: Tue 04/11/06 2:00 am
- Location: London
I presume you're talking about your Valve Junior, but it wouldn't hurt to tell people which amp you're referring to Especially with this being the 18 Watt forum!
Anyway, this post in the big VJ thread should yield your answer:
http://www.18watt.com/modules.php?name= ... ode#139186
This is for a switchable pentode/triode mode which will reduce the power to approximately half.
Anyway, this post in the big VJ thread should yield your answer:
http://www.18watt.com/modules.php?name= ... ode#139186
This is for a switchable pentode/triode mode which will reduce the power to approximately half.
0 x