New GDS 18W Single Channel chassis now available

The place to discuss 18W-related ampfests, get-togethers, gigs, etc. These should be of interest specifically to 18watt.com members.

Moderators: JMPGuitars, CurtissRobin, zaphod_phil, rock_mumbles

Post Reply
User avatar
Graydon
Admin, Charter Member
Admin, Charter Member
Posts: 1619
Joined: Fri 01/31/03 2:00 am
Location: USA
Contact:

New GDS 18W Single Channel chassis now available

Post by Graydon »

Folks,

The new Single Channel S/C chassis from GDS is now available. Plexi panels are in stock as are chassis. We have built up a couple builds (see Dan's in the main tech area) and the chassis is working great. See my blog for more information...
http://gdsamps.com/?page_id=3

You can order it here... http://gdsamps.com/?page_id=7

Image

Image

Image

Image
0 x
Sincerely,
Graydon Stuckey
www.gdsamps.com
www.guytron.com

User avatar
markh
Charter Member
Charter Member
Posts: 1503
Joined: Wed 12/18/02 2:00 am
Location: SE PA, USA
Contact:

Post by markh »

Now that is just too cute. :D

--mark
0 x

radstringz
Newbie
Newbie
Posts: 82
Joined: Sun 07/22/07 2:00 am
Location: NE Pennsylvania

Post by radstringz »

Graydon, what are the dimensions of that chassis? Will it fit in a standard Marshall-style small box?

-jr
0 x

User avatar
Graydon
Admin, Charter Member
Admin, Charter Member
Posts: 1619
Joined: Fri 01/31/03 2:00 am
Location: USA
Contact:

Post by Graydon »

radstringz wrote:Graydon, what are the dimensions of that chassis? Will it fit in a standard Marshall-style small box?

-jr
It is 11" wide by 8" deep x 2.5" tall. The 8" dimension will be actually 8.125" once you add two plexi panels.

It will not fit in any normal Marshall box because the 8" depth is too deep. However, Jeff Swanson at Swanson Cabinets and Anthony at Reason amps can build head cabinets for this chassis.
0 x
Sincerely,
Graydon Stuckey
www.gdsamps.com
www.guytron.com

User avatar
cGil
Occasional poster
Occasional poster
Posts: 313
Joined: Thu 02/22/07 2:00 am
Location: Crab Island

Post by cGil »

Sweet indeed. And just too tempting to resist any longer I'm afraid. 8)

Gil...
0 x

User avatar
Graydon
Admin, Charter Member
Admin, Charter Member
Posts: 1619
Joined: Fri 01/31/03 2:00 am
Location: USA
Contact:

Post by Graydon »

Note too in one of the photos, you can see that there are extra pot holes in the front panel so that we can make a TMB panel for those who would like an S/C TMB.

Another thought I had is that this chassis has sufficient tubes to build a Marshall 20W although it would be too small to properly fit a 20W cab. My old Marshall 20 watter rips. I'd build a clone of that one any day.
0 x
Sincerely,
Graydon Stuckey
www.gdsamps.com
www.guytron.com

Post Reply