Page 1 of 1

Dana Hall Lil' Devil

Posted: Tue 07/16/19 6:21 am
by Ampschmiede
Hello everybody!

First post, please be gentle ;-)

I have been searching the internet for days, looking for a schematic of Dana Halls Lil devil but had no luck. I have read somewhere, that the amp has been discussed on this forum when it was developed. But even after using the search function, I had no luck in finding a schematic.

If anybody that built one of these could chime in and point me to a schematic I would be super greatfull.

Best regards, Florian

Re: Dana Hall Lil' Devil

Posted: Tue 07/16/19 6:47 am
by JMPGuitars
You can try messaging Dana Hall on here or ampgarage.com. He hasn't been active here since 2011, but he was last month on ampgarage. His username here is ur12, and UR12 on the other site.

Re: Dana Hall Lil' Devil

Posted: Wed 07/17/19 9:29 am
by Ampschmiede
Hi JMP!

Thanks for pointing me to his username, I just sent him a message on this forum. I can't register on ampgarage. I seem to get the security question about "the amps primarily" discussed on the ampgarege wrong. I tried tube amps, diy amps, guitar amps but cant get it right :-)

Anyway, I hope to get an answer here, everybody is still welcome to chime in.

Best regards,

Flo

Re: Dana Hall Lil' Devil

Posted: Wed 07/17/19 12:24 pm
by crgfrench
I tried "tube" and "valve" there too ... no love

maybe we should try "transistor" or "solid state"

Re: Dana Hall Lil' Devil

Posted: Wed 07/17/19 2:33 pm
by JMPGuitars
Neither of you thought to try brand names? ;)

Re: Dana Hall Lil' Devil

Posted: Thu 07/18/19 8:19 am
by Ampschmiede
Thanks for the hint JMP!

Re: Dana Hall Lil' Devil

Posted: Sun 07/21/19 5:38 pm
by katopan
This is the original thread:
https://ampgarage.com/forum/viewtopic.php?t=6159

You can view the text as a guest but will need a login to see the attachments. Can't remember if there's a full schematic or not there.

Re: Dana Hall Lil' Devil

Posted: Mon 07/22/19 4:01 am
by Ampschmiede
Hi Katopan!

I managed to register to the page and already went through the threat. There is no schematic unfortunately.
Thank you for pointing me towards it anyways.

I have my hopes on the PMs I sent dana, but had no luck so far.

best regards