jtm50 new build

Forum to discuss amp circuits besides the 18 Watters and their ilk.

Moderators: JMPGuitars, CurtissRobin, colossal, zaphod_phil, Daviedawg, Graydon

Post Reply
jlee69
Unrated
Posts: 14
Joined: Mon 10/07/19 10:16 am
Location: MA

jtm50 new build

Post by jlee69 »

i just finished putting this together, thanks to Robert at valvestorm for guidance! I'm going over it again before firing up but i think it is ready to go...

im not sure of the exact specs of a black flag jtm50 but mostly this is just a jtm45 with beefier output transformer, i used instructions from valvestorm jtm50, crosschecked with ceriatone and triode as a best guess. im adding a ppimv and shared/split cathode switch, but going to let this settle a while before tweaking...

i also didn't connect the standby because its a tube rec... we'll see how that goes!
You do not have the required permissions to view the files attached to this post.
2 x

Post Reply