jtm50 new build
Moderators: JMPGuitars, zaphod_phil, Daviedawg, Graydon, CurtissRobin, colossal
-
- Unrated
- Posts: 14
- Joined: Mon 10/07/19 10:16 am
- Location: MA
jtm50 new build
i just finished putting this together, thanks to Robert at valvestorm for guidance! I'm going over it again before firing up but i think it is ready to go...
im not sure of the exact specs of a black flag jtm50 but mostly this is just a jtm45 with beefier output transformer, i used instructions from valvestorm jtm50, crosschecked with ceriatone and triode as a best guess. im adding a ppimv and shared/split cathode switch, but going to let this settle a while before tweaking...
i also didn't connect the standby because its a tube rec... we'll see how that goes!
im not sure of the exact specs of a black flag jtm50 but mostly this is just a jtm45 with beefier output transformer, i used instructions from valvestorm jtm50, crosschecked with ceriatone and triode as a best guess. im adding a ppimv and shared/split cathode switch, but going to let this settle a while before tweaking...
i also didn't connect the standby because its a tube rec... we'll see how that goes!
You do not have the required permissions to view the files attached to this post.
2 x