Page 1 of 1

jtm50 new build

Posted: Sun 11/10/19 7:59 pm
by jlee69
i just finished putting this together, thanks to Robert at valvestorm for guidance! I'm going over it again before firing up but i think it is ready to go...

im not sure of the exact specs of a black flag jtm50 but mostly this is just a jtm45 with beefier output transformer, i used instructions from valvestorm jtm50, crosschecked with ceriatone and triode as a best guess. im adding a ppimv and shared/split cathode switch, but going to let this settle a while before tweaking...

i also didn't connect the standby because its a tube rec... we'll see how that goes!