Thoughts on a 5E3 Hybrid

[Ampman5150]

I'm hoping this file attached..
V1 from a 5E3 feeding a LTP from an 18 watt

[JMPGuitars]

The tonestack from a 5E3 has been built plenty of times with 18 watters, usually around the Lite 2b circuit...

No file attached though, so I'm not sure what you're looking at specifically.

[Ampman5150]

Damn.. It says its attached but keeps on giving me an invalid error message.

Description then...
V1 from a 5E3
V2 (and the rest) from a 18 watt Lite II

[JMPGuitars]

What kind of file is it?

[crgfrench]

You can build a Fullerwell and just wire V2 as a LTP instead of cathodyne. But why?

[Ampman5150]

What kind of file is it?

I have it in a PDF

[Ampman5150]

You can build a Fullerwell and just wire V2 as a LTP instead of cathodyne. But why?

I like the sound

[JMPGuitars]

Well, it worked for me. Somebody else try attaching a PDF.

[geoff 1965]

tt-spitf-layout.pdf

[JMPGuitars]

I have it in a PDF

Weird, we're able to attach PDFs. Try placing it inline (or not if you already were). Also check the file size.

I like the sound

That seemed obvious to me.

[colossal]

tt-spitf-layout.pdf

The bright cap is shown as 680p. I believe that should say 180p.

[geoff 1965]

yeah it's just a spitfire pdf i had and posted to test the uploading, i tried the master volume on my lite 2 but did'nt like it!
here's the schematic for anyone who's interested in it

tt-spitf-schematic.pdf

[colossal]

yeah it's just a spitfire pdf i had and posted to test the uploading, i tried the master volume on my lite 2 but did'nt like it!
here's the schematic for anyone who's interested in it
tt-spitf-schematic.pdf

Hi Geoff,

Sorry, my OCD compelled me to mention that cap value! Interestingly, it is shown as 680p on the schematic too, so may just be TubeTown's mod. Sorry for the topic derail.

[geoff 1965]

any luck with that pdf Ampman?
i found this schematic with half 5e3 input into a LTP 6V6 power amp but not sure if this is what you mean.

5E3-18w hybrid.gif

[Ampman5150]

any luck with that pdf Ampman?
i found this schematic with half 5e3 input into a LTP 6V6 power amp but not sure if this is what you mean.

5E3-18w hybrid.gif

I have it in a PDF

Weird, we're able to attach PDFs. Try placing it inline (or not if you already were). Also check the file size.

I like the sound

That seemed obvious to me.

No luck.. It try's to load but then I get the yellow triangle error saying 'invalid filename'.. obviously this is on my end.

This is my scenario and my basic question:
I have a 5E3 Deluxe chassis, cab, speaker, and transformer set.
I want to match up a 4 input V1 pre-amp from the 5E3 to a LTP of a 'Marshall type' PI. I would like to retain the separate volume controls of the 2 channels with the single tone knob (Keeping the stock look of the chassis.)
My idea was to build a 'sleeper'...
Something that 'looks' like a tweed deluxe but with a bunch more snarl.
I've done the Robinette mods, the Caldwell mods, and a bunch more mods but haven't been able to get that snort out of it yet.
Modifying the chassis is a no go as I have not yet been able to find one that the nickel wont peel off if I drill a hole in it.
I super appreciate all your help guys.. maybe there is a reason I haven't found what I'm looking for.
Cheers