Edit: after looking at online pics of the imperial I noticed the bass pot is wired backwards on the schematic. So I have to move the wire from lug 1 to lug 3. Going to do that later this week when my 500V filter caps arrive, along with the 1M vol pot and the 1M-RA speed pot.Bieworm wrote: βMon 10/26/20 1:34 pmThe snubber is implemented.. the audible difference is not big, but it helps a little. It's not that same swirl on the decaying note we solve with the PR mod .. I think It's pretty normal with that enhanced mid bump the mid-bite pot creates. When I dial that back it disappears. I don't know yet if I don't like it.. I think I kinda do actually. Might be the honeymoon phase ...
I noticed something odd on the clean channel.. when I dime the bass it looses all bass. Beyond 3 O'clock it has no more bass. I already mentioned the volume pot is a 500k-A when it should be a 1M-A. Is there a link?
Another thing that puzzles me is that the wiper from the bass pot is connected to ground via a 10k resistor. Shouldn't the 3rd lug be that connection? On the DR it's the latter...
Edit #2: swapped the wire and now it works normal. Djeez a log pot is unrecognizeable when wired incorrect. The taper is so misleading...