preparing the 6G3 deluxe reverb build

Forum to discuss amp circuits besides the 18 Watters and their ilk.

Moderators: JMPGuitars, CurtissRobin, colossal, zaphod_phil, Daviedawg, Graydon

User avatar
colossal
Moderator
Moderator
Posts: 421
Joined: Thu 05/10/07 2:00 am
Location: Moving through Kashmir

Re: preparing the 6G3 deluxe reverb build

Post by colossal »

Nice work, Bjorn!
1 x

User avatar
Bieworm
Verbose Wizard of Oz
Verbose Wizard of Oz
Posts: 1474
Joined: Mon 02/10/20 8:24 am
Location: Belgium

Re: preparing the 6G3 deluxe reverb build

Post by Bieworm »

Here's a crappy Phone recording of it with the Celestion Alnico Cream

https://www.dropbox.com/s/quu1x8oyzqzq4 ... m.m4a?dl=0
3 x
"THIS should be played at high volume..preferably in a residential area"

User avatar
zaphod_phil
Builder, Admin
Builder, Admin
Posts: 15105
Joined: Wed 03/19/03 2:00 am
Location: YYZ

Re: preparing the 6G3 deluxe reverb build

Post by zaphod_phil »

That sounds great! Nice crisp high-end, almost good enough to be a Marshall 18W :) Just one question, what were you driving the input with to get that nice breakup?
0 x
Nature abhors a clean tube amp

User avatar
Bieworm
Verbose Wizard of Oz
Verbose Wizard of Oz
Posts: 1474
Joined: Mon 02/10/20 8:24 am
Location: Belgium

Re: preparing the 6G3 deluxe reverb build

Post by Bieworm »

zaphod_phil wrote: ↑
Fri 10/15/21 12:01 pm
That sounds great! Nice crisp high-end, almost good enough to be a Marshall 18W :) Just one question, what were you driving the input with to get that nice breakup?
It's just my jazzmaster with a P90 bridge pup and the amp at 100%, both channels in parallel.
The amp is merely an addition to my rig.. ain't no chance it's going to replace my Tremolo TMB. It's not THAT good πŸ˜‰
What puzzles me is why a 20Watt fixed bias amp is not as loud as an 18W cathode biased one... same speaker.. guess it's the extended dynamics of the 18W
The 6G3 does what it does, and puts down a terrific sound. The 18W is more inpredictable and can surprise me in very nice ways. I guess the 6G3 is male and the 18W female... sexism??? Sew me... #met'oh-well
0 x
"THIS should be played at high volume..preferably in a residential area"

User avatar
zaphod_phil
Builder, Admin
Builder, Admin
Posts: 15105
Joined: Wed 03/19/03 2:00 am
Location: YYZ

Re: preparing the 6G3 deluxe reverb build

Post by zaphod_phil »

Bieworm wrote: ↑
Sat 10/16/21 6:01 am
zaphod_phil wrote: ↑
Fri 10/15/21 12:01 pm
That sounds great! Nice crisp high-end, almost good enough to be a Marshall 18W :) Just one question, what were you driving the input with to get that nice breakup?
Bieworm wrote: ↑
Sat 10/16/21 6:01 am
It's just my jazzmaster with a P90 bridge pup and the amp at 100%, both channels in parallel.
The amp is merely an addition to my rig.. ain't no chance it's going to replace my Tremolo TMB. It's not THAT good πŸ˜‰
zaphod_phil wrote: ↑
Fri 10/15/21 12:01 pm
You seem to have a pretty hot P90 there! :)
Bieworm wrote: ↑
Sat 10/16/21 6:01 am
What puzzles me is why a 20Watt fixed bias amp is not as loud as an 18W cathode biased one... same speaker.. guess it's the extended dynamics of the 18W
zaphod_phil wrote: ↑
Fri 10/15/21 12:01 pm
I think it's probably more because the cathode-biased 18W compresses the sound more, which will tend to make it sound louder
1 x
Nature abhors a clean tube amp

User avatar
zaphod_phil
Builder, Admin
Builder, Admin
Posts: 15105
Joined: Wed 03/19/03 2:00 am
Location: YYZ

Re: preparing the 6G3 deluxe reverb build

Post by zaphod_phil »

Bieworm wrote: ↑
Sat 10/16/21 6:01 am
zaphod_phil wrote: ↑
Fri 10/15/21 12:01 pm
That sounds great! Nice crisp high-end, almost good enough to be a Marshall 18W :) Just one question, what were you driving the input with to get that nice breakup?
It's just my jazzmaster with a P90 bridge pup and the amp at 100%, both channels in parallel.
The amp is merely an addition to my rig.. ain't no chance it's going to replace my Tremolo TMB. It's not THAT good πŸ˜‰
What puzzles me is why a 20Watt fixed bias amp is not as loud as an 18W cathode biased one... same speaker.. guess it's the extended dynamics of the 18W
I think it's more likely due to the fact that the cathode-biased 18W compresses the sound more, which makes it sound as if it's louder. :D
Bieworm wrote: ↑
Sat 10/16/21 6:01 am
The 6G3 does what it does, and puts down a terrific sound. The 18W is more inpredictable and can surprise me in very nice ways.
I guess the 6G3 is male and the 18W female... sexism??? Sew me... #met'oh-well
:lol: I guess you mean "sue" LOL
1 x
Nature abhors a clean tube amp

User avatar
Bieworm
Verbose Wizard of Oz
Verbose Wizard of Oz
Posts: 1474
Joined: Mon 02/10/20 8:24 am
Location: Belgium

Re: preparing the 6G3 deluxe reverb build

Post by Bieworm »

The 6G3 is more of a home player. It's creamier than my 18 watts.. not as crisp anyway. But I added a larmar PPIMV to it and it really sounds great with it. I'm trying that in one of my 18 watts too. Maybe I like it.. probably not.
0 x
"THIS should be played at high volume..preferably in a residential area"

User avatar
zaphod_phil
Builder, Admin
Builder, Admin
Posts: 15105
Joined: Wed 03/19/03 2:00 am
Location: YYZ

Re: preparing the 6G3 deluxe reverb build

Post by zaphod_phil »

Bieworm wrote: ↑
Sat 10/16/21 6:01 am
zaphod_phil wrote: ↑
Fri 10/15/21 12:01 pm
That sounds great! Nice crisp high-end, almost good enough to be a Marshall 18W :) Just one question, what were you driving the input with to get that nice breakup?
It's just my jazzmaster with a P90 bridge pup and the amp at 100%, both channels in parallel.
The amp is merely an addition to my rig.. ain't no chance it's going to replace my Tremolo TMB. It's not THAT good πŸ˜‰
What puzzles me is why a 20Watt fixed bias amp is not as loud as an 18W cathode biased one... same speaker.. guess it's the extended dynamics of the 18W
The 6G3 does what it does, and puts down a terrific sound. The 18W is more inpredictable and can surprise me in very nice ways. I guess the 6G3 is male and the 18W female... sexism??? Sue me... #met'oh-well
LOL
You seem to betting plenty of drive out of that P90. Have you ever tried connecting it in series with the original F*nd*r pickup?
0 x
Nature abhors a clean tube amp

User avatar
Bieworm
Verbose Wizard of Oz
Verbose Wizard of Oz
Posts: 1474
Joined: Mon 02/10/20 8:24 am
Location: Belgium

Re: preparing the 6G3 deluxe reverb build

Post by Bieworm »

zaphod_phil wrote: ↑
Wed 10/20/21 2:05 pm
Bieworm wrote: ↑
Sat 10/16/21 6:01 am
zaphod_phil wrote: ↑
Fri 10/15/21 12:01 pm
That sounds great! Nice crisp high-end, almost good enough to be a Marshall 18W :) Just one question, what were you driving the input with to get that nice breakup?
It's just my jazzmaster with a P90 bridge pup and the amp at 100%, both channels in parallel.
The amp is merely an addition to my rig.. ain't no chance it's going to replace my Tremolo TMB. It's not THAT good πŸ˜‰
What puzzles me is why a 20Watt fixed bias amp is not as loud as an 18W cathode biased one... same speaker.. guess it's the extended dynamics of the 18W
The 6G3 does what it does, and puts down a terrific sound. The 18W is more inpredictable and can surprise me in very nice ways. I guess the 6G3 is male and the 18W female... sexism??? Sue me... #met'oh-well
LOL
You seem to betting plenty of drive out of that P90. Have you ever tried connecting it in series with the original F*nd*r pickup?
What in series? Amp channels or pickups ?
BTW.. I don't have any F*nder pickups..πŸ˜€πŸ˜€
0 x
"THIS should be played at high volume..preferably in a residential area"

Post Reply