6G3 build

Forum to discuss amp circuits besides the 18 Watters and their ilk.

Moderators: JMPGuitars, CurtissRobin, colossal, zaphod_phil, Daviedawg, Graydon

Post Reply
User avatar
Bieworm
Verbose Wizard of Oz
Verbose Wizard of Oz
Posts: 1474
Joined: Mon 02/10/20 8:24 am
Location: Belgium

6G3 build

Post by Bieworm »

Ok, I started building it. I bit the bullet and I'm not doing reverb on board. Next I'm building a stand alone reverb for that. I wanted one anyway...
The normal channel is a plexi like preamp, inspired on the Cutthroat Audio Down Brownie.
Power supply nearly finished. Heaters wired...
20210912_220416.jpg
20210912_221541.jpg
You do not have the required permissions to view the files attached to this post.
2 x
"THIS should be played at high volume..preferably in a residential area"

User avatar
Bieworm
Verbose Wizard of Oz
Verbose Wizard of Oz
Posts: 1474
Joined: Mon 02/10/20 8:24 am
Location: Belgium

Re: 6G3 build

Post by Bieworm »

Did some more wiring. Push pull pot for parallel channels. And some other stuff...
Mojo f*cked up just another schematic... lol! They put the polarized cap on the bias board with negative to ground.. unbelievable!!!
20210915_215412.jpg
20210915_215408.jpg
20210915_215646.jpg
You do not have the required permissions to view the files attached to this post.
2 x
"THIS should be played at high volume..preferably in a residential area"

User avatar
JMPGuitars
Super Duper Admin
Super Duper Admin
Posts: 3063
Joined: Tue 09/18/12 8:00 pm
Location: South Central, MA
Contact:

Re: 6G3 build

Post by JMPGuitars »

Are you publicly admitting to reading a mojo schematic?! Hahahahahahahaha
0 x
'I installed a skylight in my apartment yesterday... The people who live above me are furious.' - Steven Wright

Modern Ground Schemes
Soldering Technique
B+ Voltage Reduction


Web Design: DolceVittoria.com
Guitars / Amps / Effects: JMPGuitars.com
(anti)Social: Facebook · Instagram
Items for Sale

User avatar
Bieworm
Verbose Wizard of Oz
Verbose Wizard of Oz
Posts: 1474
Joined: Mon 02/10/20 8:24 am
Location: Belgium

Re: 6G3 build

Post by Bieworm »

JMPGuitars wrote:
Wed 09/15/21 4:47 pm
Are you publicly admitting to reading a mojo schematic?! Hahahahahahahaha
I'm ashamed to admit .. but Yes. 😄!
It was the only clear schematic I could find. The f#nder ones are blurry ...the mojo one looked ok. It's not uncommon that electrolytics have their negative side connected to ground😉 LOL
1 x
"THIS should be played at high volume..preferably in a residential area"

Post Reply