Hammond AO-43transformer information needed

18watt-specific Tech Talk - Building, Fixing, Parts, Mods...

Moderators: CurtissRobin, colossal, zaphod_phil, Daviedawg, Graydon

User avatar
zaphod_phil
Builder, Admin
Builder, Admin
Posts: 14993
Joined: Wed 03/19/03 2:00 am
Location: YYZ

Re:

Post by zaphod_phil »

POWDOG wrote:
Mon 09/26/11 8:09 am
with a 5U4, this puts around 340v on the EL84 plates, which is Hammond spec. A little hot, but haven't burned up any tubes yet.
Actually that's close to perfect for an 18W. Just use a 180 ohm cathode resistor with a 1000uF or 2200uF cap on the power tubes.
1 x
Nature abhors a clean tube amp

Post Reply