Josh's 18W Tremolo TMB Builds
Moderators: zaphod_phil, Daviedawg, Graydon, CurtissRobin, colossal
-
- Verbose poster
- Posts: 1118
- Joined: Mon 01/04/16 3:52 pm
Re: Josh's 18W Tremolo TMB Builds
interesting point Jack! one of my friends used to play pub gigs and he just used a preamp for the guitar into a PA system which had peavey speakers with tweeters,sounded really good!
0 x
- JMPGuitars
- Super Duper Admin
- Posts: 3965
- Joined: Tue 09/18/12 8:00 pm
- Location: South Central, MA
- Contact:
Re: Josh's 18W Tremolo TMB Builds
Not me. IME, guitar speakers are usually too bright. If you look at the published tone curves for most speakers, you can see emphasis on high mids and trebles already.TriodeLuvr wrote: ↑Sat 03/13/21 6:34 pmJust wondering, has either of you (Josh or Bieworm) ever built a guitar cabinet with a tweeter? Seems like that would provide a big range of additional high end response. Maybe it would make the amp a little less dependent on the tonal quality of the main speaker.
Jack
0 x
'I installed a skylight in my apartment yesterday... The people who live above me are furious.' - Steven Wright
Modern Ground Schemes
Soldering Technique
B+ Voltage Reduction
Amplifier Tools & Parts Info
Web Design: DolceVittoria.com
Guitars / Amps / Effects: JMPGuitars.com
(anti)Social: Facebook · Instagram
Items for Sale
Modern Ground Schemes
Soldering Technique
B+ Voltage Reduction
Amplifier Tools & Parts Info
Web Design: DolceVittoria.com
Guitars / Amps / Effects: JMPGuitars.com
(anti)Social: Facebook · Instagram
Items for Sale
- TriodeLuvr
- Frequent poster
- Posts: 616
- Joined: Tue 10/16/18 11:19 am
Re: Josh's 18W Tremolo TMB Builds
Don't most guitar speakers roll off pretty fast above 4K or 5K? That truncates a lot of harmonics. I was thinking about this because of my experience with the Leslie. That high frequency horn really makes it shimmer. Maybe I'll clip lead something together and give it a try...
Jack
Jack
1 x
- JMPGuitars
- Super Duper Admin
- Posts: 3965
- Joined: Tue 09/18/12 8:00 pm
- Location: South Central, MA
- Contact:
Re: Josh's 18W Tremolo TMB Builds
Yes, but that 2K to 5K range can be ear piercing. I suppose it could be an interesting and/or painful experiment.
0 x
'I installed a skylight in my apartment yesterday... The people who live above me are furious.' - Steven Wright
Modern Ground Schemes
Soldering Technique
B+ Voltage Reduction
Amplifier Tools & Parts Info
Web Design: DolceVittoria.com
Guitars / Amps / Effects: JMPGuitars.com
(anti)Social: Facebook · Instagram
Items for Sale
Modern Ground Schemes
Soldering Technique
B+ Voltage Reduction
Amplifier Tools & Parts Info
Web Design: DolceVittoria.com
Guitars / Amps / Effects: JMPGuitars.com
(anti)Social: Facebook · Instagram
Items for Sale
- TriodeLuvr
- Frequent poster
- Posts: 616
- Joined: Tue 10/16/18 11:19 am
Re: Josh's 18W Tremolo TMB Builds
The concept I'm thinking about is to pull back that upper-mid response with the tone controls, then accentuate the area above it with the tweeter. The tweeter output will of course bleed into the mids, but again, the tone controls should be able to correct for that. It just seems to me that a speaker system like this would allow the amp to really show its stuff. Didn't Mesa Boogie or some other manufacturer make amps like this, a woofer plus a mid/tweeter cone?JMPGuitars wrote: ↑Sat 03/13/21 9:43 pmYes, but that 2K to 5K range can be ear piercing. I suppose it could be an interesting and/or painful experiment.
Jack
0 x
- Bieworm
- Verbose Moderator
- Posts: 2302
- Joined: Mon 02/10/20 8:24 am
- Location: Belgium
Re: Josh's 18W Tremolo TMB Builds
Would be a great experiment though. Keep us posted. Always interested in tonal excursions...
0 x
"THIS should be played at high volume..preferably in a residential area"
- JMPGuitars
- Super Duper Admin
- Posts: 3965
- Joined: Tue 09/18/12 8:00 pm
- Location: South Central, MA
- Contact:
Re: Josh's 18W Tremolo TMB Builds
I don't remember. It's common practice for bass cabinets, but not guitar. The lazy skeptic in me assumes it's not common for guitar because it doesn't add enough benefit compared to the cost. But, I'd still love to hear what you come up with.TriodeLuvr wrote: ↑Sat 03/13/21 10:30 pmThe concept I'm thinking about is to pull back that upper-mid response with the tone controls, then accentuate the area above it with the tweeter. The tweeter output will of course bleed into the mids, but again, the tone controls should be able to correct for that. It just seems to me that a speaker system like this would allow the amp to really show its stuff. Didn't Mesa Boogie or some other manufacturer make amps like this, a woofer plus a mid/tweeter cone?
0 x
'I installed a skylight in my apartment yesterday... The people who live above me are furious.' - Steven Wright
Modern Ground Schemes
Soldering Technique
B+ Voltage Reduction
Amplifier Tools & Parts Info
Web Design: DolceVittoria.com
Guitars / Amps / Effects: JMPGuitars.com
(anti)Social: Facebook · Instagram
Items for Sale
Modern Ground Schemes
Soldering Technique
B+ Voltage Reduction
Amplifier Tools & Parts Info
Web Design: DolceVittoria.com
Guitars / Amps / Effects: JMPGuitars.com
(anti)Social: Facebook · Instagram
Items for Sale
-
- Verbose poster
- Posts: 1118
- Joined: Mon 01/04/16 3:52 pm
Re: Josh's 18W Tremolo TMB Builds
maybe with Mesa that's where they got the idea of a tonestack and built in graphic equalizer like the studio & mk5 amps?
0 x
- JMPGuitars
- Super Duper Admin
- Posts: 3965
- Joined: Tue 09/18/12 8:00 pm
- Location: South Central, MA
- Contact:
Re: Josh's 18W Tremolo TMB Builds
Or maybe it was the only way to get any decent tones out of them.geoff 1965 wrote: ↑Sun 03/14/21 8:43 ammaybe with Mesa that's where they got the idea of a tonestack and built in graphic equalizer like the studio & mk5 amps?
I did like their amps before discover 18 watters, but after that they felt dull and lifeless.
1 x
'I installed a skylight in my apartment yesterday... The people who live above me are furious.' - Steven Wright
Modern Ground Schemes
Soldering Technique
B+ Voltage Reduction
Amplifier Tools & Parts Info
Web Design: DolceVittoria.com
Guitars / Amps / Effects: JMPGuitars.com
(anti)Social: Facebook · Instagram
Items for Sale
Modern Ground Schemes
Soldering Technique
B+ Voltage Reduction
Amplifier Tools & Parts Info
Web Design: DolceVittoria.com
Guitars / Amps / Effects: JMPGuitars.com
(anti)Social: Facebook · Instagram
Items for Sale
- Bieworm
- Verbose Moderator
- Posts: 2302
- Joined: Mon 02/10/20 8:24 am
- Location: Belgium
Re: Josh's 18W Tremolo TMB Builds
Josh, what are the dimensions of the PCB?JMPGuitars wrote: ↑Mon 02/15/21 3:59 pmSome more progress today. I wire prepped and connected the pots, and PCB.
_JMP1918.jpg
_JMP1925.jpg
Edit: found the measurements when rereading this entire thread... wow.
3.75x12.1. Its 95mm x 307mm
0 x
"THIS should be played at high volume..preferably in a residential area"
- JMPGuitars
- Super Duper Admin
- Posts: 3965
- Joined: Tue 09/18/12 8:00 pm
- Location: South Central, MA
- Contact:
Re: Josh's 18W Tremolo TMB Builds
Hahahaha, yup. It's a beast. And wait until you see it in person, you'll never compare it to the crap Mesa or Bogner put out again.
1 x
'I installed a skylight in my apartment yesterday... The people who live above me are furious.' - Steven Wright
Modern Ground Schemes
Soldering Technique
B+ Voltage Reduction
Amplifier Tools & Parts Info
Web Design: DolceVittoria.com
Guitars / Amps / Effects: JMPGuitars.com
(anti)Social: Facebook · Instagram
Items for Sale
Modern Ground Schemes
Soldering Technique
B+ Voltage Reduction
Amplifier Tools & Parts Info
Web Design: DolceVittoria.com
Guitars / Amps / Effects: JMPGuitars.com
(anti)Social: Facebook · Instagram
Items for Sale
- Bieworm
- Verbose Moderator
- Posts: 2302
- Joined: Mon 02/10/20 8:24 am
- Location: Belgium
Re: Josh's 18W Tremolo TMB Builds
I anticipated this by ordering a dumble style chassis blankJMPGuitars wrote: ↑Wed 03/17/21 2:43 pmHahahaha, yup. It's a beast. And wait until you see it in person, you'll never compare it to the crap Mesa or Bogner put out again.
1 x
"THIS should be played at high volume..preferably in a residential area"
-
- The MAN
- Posts: 125
- Joined: Wed 03/09/16 10:07 pm
- Location: Oregon
Re: Josh's 18W Tremolo TMB Builds
I believe when I asked before about using a "standard" chassis the response was yes. What's driving the 3.75 dimension? Can it be shrunk? I'll have to check my CAD model...Josh, what are the dimensions of the PCB?
Edit: found the measurements when rereading this entire thread... wow.
3.75x12.1. Its 95mm x 307mm
Other amp issues are requiring some attention...my tremolo has stopped working and it seems like the intensity control greatly reduces volume...I will start with a voltage check and some tube swappin'...oh yeah, it was starting to make whooshy noises, that would stop with a moderate beating of the head cab...9-)
0 x
- JMPGuitars
- Super Duper Admin
- Posts: 3965
- Joined: Tue 09/18/12 8:00 pm
- Location: South Central, MA
- Contact:
Re: Josh's 18W Tremolo TMB Builds
3.25" is pretty standard. That extra half inch won't likely be the dimension that limits the chassis you can use. 12.1" is pretty long, but should fit most 18W chassis.
0 x
'I installed a skylight in my apartment yesterday... The people who live above me are furious.' - Steven Wright
Modern Ground Schemes
Soldering Technique
B+ Voltage Reduction
Amplifier Tools & Parts Info
Web Design: DolceVittoria.com
Guitars / Amps / Effects: JMPGuitars.com
(anti)Social: Facebook · Instagram
Items for Sale
Modern Ground Schemes
Soldering Technique
B+ Voltage Reduction
Amplifier Tools & Parts Info
Web Design: DolceVittoria.com
Guitars / Amps / Effects: JMPGuitars.com
(anti)Social: Facebook · Instagram
Items for Sale
- Bieworm
- Verbose Moderator
- Posts: 2302
- Joined: Mon 02/10/20 8:24 am
- Location: Belgium
Re: Josh's 18W Tremolo TMB Builds
For a standard turretboard there wouldn't be space issues, although the standard boards are a little difficult in length unless it's pretty crowded.
I make my own turretboards nowadays from 3mm thick fiberboards that measure 80x500mm. I cut those to 70x340mm.
In case of the use of the dedicated PCB I'd use a dumble style chassis. It's about 2" longer and 1" wider.
I make my own turretboards nowadays from 3mm thick fiberboards that measure 80x500mm. I cut those to 70x340mm.
In case of the use of the dedicated PCB I'd use a dumble style chassis. It's about 2" longer and 1" wider.
1 x
"THIS should be played at high volume..preferably in a residential area"
-
- The MAN
- Posts: 125
- Joined: Wed 03/09/16 10:07 pm
- Location: Oregon
Re: Josh's 18W Tremolo TMB Builds
I'd prefer not to need another cab... I'm curious about the term dedicated PCB - are you referring to the board shown for the rectifier or the main PCB?In case of the use of the dedicated PCB I'd use a dumble style chassis. It's about 2" longer and 1" wider.
I did a quick search for dumble style chassis and there seem to be some options...I used to have a press brake years ago but maybe it's time to see if a hand brake could be used for chassis builds...
1 x
- Bieworm
- Verbose Moderator
- Posts: 2302
- Joined: Mon 02/10/20 8:24 am
- Location: Belgium
Re: Josh's 18W Tremolo TMB Builds
I meant Josh’s tremolo TMB reverb PCB.lavrgs wrote: ↑Wed 03/24/21 12:29 pmI'd prefer not to need another cab... I'm curious about the term dedicated PCB - are you referring to the board shown for the rectifier or the main PCB?In case of the use of the dedicated PCB I'd use a dumble style chassis. It's about 2" longer and 1" wider.
I did a quick search for dumble style chassis and there seem to be some options...I used to have a press brake years ago but maybe it's time to see if a hand brake could be used for chassis builds...
If the new chassis works out nice I'll be ordering more of those.
For 2mm aluminium a hand brake should be plenty ok.
0 x
"THIS should be played at high volume..preferably in a residential area"
- Bieworm
- Verbose Moderator
- Posts: 2302
- Joined: Mon 02/10/20 8:24 am
- Location: Belgium
Re: Josh's 18W Tremolo TMB Builds
Josh, do you ground your reverb jacks directly to the chassis?
0 x
"THIS should be played at high volume..preferably in a residential area"
- JMPGuitars
- Super Duper Admin
- Posts: 3965
- Joined: Tue 09/18/12 8:00 pm
- Location: South Central, MA
- Contact:
Re: Josh's 18W Tremolo TMB Builds
I do. I haven't tested it compared to isolating them, but it has generally worked fine for me.
1 x
'I installed a skylight in my apartment yesterday... The people who live above me are furious.' - Steven Wright
Modern Ground Schemes
Soldering Technique
B+ Voltage Reduction
Amplifier Tools & Parts Info
Web Design: DolceVittoria.com
Guitars / Amps / Effects: JMPGuitars.com
(anti)Social: Facebook · Instagram
Items for Sale
Modern Ground Schemes
Soldering Technique
B+ Voltage Reduction
Amplifier Tools & Parts Info
Web Design: DolceVittoria.com
Guitars / Amps / Effects: JMPGuitars.com
(anti)Social: Facebook · Instagram
Items for Sale
- Bieworm
- Verbose Moderator
- Posts: 2302
- Joined: Mon 02/10/20 8:24 am
- Location: Belgium
Re: Josh's 18W Tremolo TMB Builds
Thanks! I'm gonna put a dwell control in the 36.. I did this on my 18 too.. on the back panel thoughI do. I haven't tested it compared to isolating them, but it has generally worked fine for me.
0 x
"THIS should be played at high volume..preferably in a residential area"