Filmosound 18Watt conversion, Help!

18watt-specific Tech Talk - Building, Fixing, Parts, Mods...

Moderators: CurtissRobin, colossal, zaphod_phil, Daviedawg, Graydon

User avatar
JMPGuitars
Super Duper Admin
Super Duper Admin
Posts: 3954
Joined: Tue 09/18/12 8:00 pm
Location: South Central, MA
Contact:

Re: Filmosound 18Watt conversion, Help!

Post by JMPGuitars »

Bieworm wrote:
Sat 03/27/21 7:39 am
I don't use them for V1 or V2. But they rule as reverb tube. The EL84 M is a really rugged tube. It's a real difference in glass thickness too..
I did. I used all Sovtek WAs and 1 WB in my 36W Trem TMB. I'm gonna try and finally record a demo with it this weekend. Cryoset TungSol EL34s for the power tubes. I don't usually buy into the cryo stuff, but I had a pair in my tube stash.
1 x
'I installed a skylight in my apartment yesterday... The people who live above me are furious.' - Steven Wright

Modern Ground Schemes
Soldering Technique
B+ Voltage Reduction
Amplifier Tools & Parts Info


Web Design: DolceVittoria.com
Guitars / Amps / Effects: JMPGuitars.com
(anti)Social: Facebook · Instagram
Items for Sale

User avatar
TriodeLuvr
Frequent poster
Frequent poster
Posts: 616
Joined: Tue 10/16/18 11:19 am

Re: Filmosound 18Watt conversion, Help!

Post by TriodeLuvr »

Bieworm wrote:
Sat 03/27/21 7:39 am
JMPGuitars wrote:
Sat 03/27/21 7:06 am
TriodeLuvr wrote:
Fri 03/26/21 11:39 pm
I've heard good things about the EL84M, available directly from eastern Europe. Not as cheap as they used to be though.

Jack
The Sovteks? Sovteks are better than JJ, but I haven't personally tried their EL84 varieties. I was pleasantly surprised by their 7025 series 12AX7WA and WB tubes. Their regular 12AX7s aren't exciting, but still better than JJ. I haven't A/B'd them with anything else though.
I don't use them for V1 or V2. But they rule as reverb tube. The EL84 M is a really rugged tube. It's a real difference in glass thickness too..
Hi-fi builders use the EL84M to sub for the 7189, which is an up-rated EL84. Not sure I have a good copy of the exact specs, but a pair of 7189 can output 24W. I think the EL84M is probably the most reliable variant available at this time.

Image
1 x

User avatar
Bieworm
Verbose Moderator
Verbose Moderator
Posts: 2287
Joined: Mon 02/10/20 8:24 am
Location: Belgium

Re: Filmosound 18Watt conversion, Help!

Post by Bieworm »

JMPGuitars wrote:
Sat 03/27/21 11:14 am
Bieworm wrote:
Sat 03/27/21 7:39 am
I don't use them for V1 or V2. But they rule as reverb tube. The EL84 M is a really rugged tube. It's a real difference in glass thickness too..
I did. I used all Sovtek WAs and 1 WB in my 36W Trem TMB. I'm gonna try and finally record a demo with it this weekend. Cryoset TungSol EL34s for the power tubes. I don't usually buy into the cryo stuff, but I had a pair in my tube stash.
To my ears the EHX 12ax7 is the nicer V1. I actually like the sound of a JJ ECC83S but I just don't trust them anymore...
0 x
"THIS should be played at high volume..preferably in a residential area"

User avatar
LeifH
Unrated
Posts: 24
Joined: Tue 10/06/09 2:00 am
Location: Unknown

Re: Filmosound 18Watt conversion, Help!

Post by LeifH »

I'm as an experiment, I've ordered some 6P14P mil spec soviet made tubes from ebay.
8 for $20, gives me spares in case. First bit of reading, some claim that they are what the tube store label their preferred 7189s?

It gives me spares, which is what I'm missing.

As a back up if the 6P14P sound terrible a set of Tung Sol new production from the Tube Store, I needed some other parts, so I thought I'd try these as well.

In the mean time, I checked with a meter, I'm not getting any shorts between pins on the output sockets, looks like it was just the tube going bad, crap.
2 x

User avatar
JMPGuitars
Super Duper Admin
Super Duper Admin
Posts: 3954
Joined: Tue 09/18/12 8:00 pm
Location: South Central, MA
Contact:

Re: Filmosound 18Watt conversion, Help!

Post by JMPGuitars »

Bieworm wrote:
Sat 03/27/21 12:00 pm
To my ears the EHX 12ax7 is the nicer V1. I actually like the sound of a JJ ECC83S but I just don't trust them anymore...
Mullard's probably my favorite, followed by Tung Sol. I don't know where these Sovteks rank yet (to me), and I haven't tried the EHX in a while, though I think I have an EHX 7025 in my stash. Maybe on the next build I try some V1 tube swapping and see what sounds best.
1 x
'I installed a skylight in my apartment yesterday... The people who live above me are furious.' - Steven Wright

Modern Ground Schemes
Soldering Technique
B+ Voltage Reduction
Amplifier Tools & Parts Info


Web Design: DolceVittoria.com
Guitars / Amps / Effects: JMPGuitars.com
(anti)Social: Facebook · Instagram
Items for Sale

User avatar
TriodeLuvr
Frequent poster
Frequent poster
Posts: 616
Joined: Tue 10/16/18 11:19 am

Re: Filmosound 18Watt conversion, Help!

Post by TriodeLuvr »

LeifH wrote:
Sat 03/27/21 1:01 pm
I'm as an experiment, I've ordered some 6P14P mil spec soviet made tubes from ebay.
8 for $20, gives me spares in case. First bit of reading, some claim that they are what the tube store label their preferred 7189s?

It gives me spares, which is what I'm missing.

As a back up if the 6P14P sound terrible a set of Tung Sol new production from the Tube Store, I needed some other parts, so I thought I'd try these as well.

In the mean time, I checked with a meter, I'm not getting any shorts between pins on the output sockets, looks like it was just the tube going bad, crap.
The audio guys say the 6P14P is a good choice, suitable for anode voltages up to at least +400V. A number of them have also apparently used it to replace the 7189. Just have to be sure not to exceed the 12W anode rating. Wow, $2.50 each?? I might have to buy some myself, just to keep around.

Jack
0 x

User avatar
Bieworm
Verbose Moderator
Verbose Moderator
Posts: 2287
Joined: Mon 02/10/20 8:24 am
Location: Belgium

Re: Filmosound 18Watt conversion, Help!

Post by Bieworm »

LeifH wrote:
Sat 03/27/21 1:01 pm
I'm as an experiment, I've ordered some 6P14P mil spec soviet made tubes from ebay.
8 for $20, gives me spares in case. First bit of reading, some claim that they are what the tube store label their preferred 7189s?

It gives me spares, which is what I'm missing.

As a back up if the 6P14P sound terrible a set of Tung Sol new production from the Tube Store, I needed some other parts, so I thought I'd try these as well.

In the mean time, I checked with a meter, I'm not getting any shorts between pins on the output sockets, looks like it was just the tube going bad, crap.
I have those 6p14p too on my 18 watts. One pair has gone microphonic... not bad, but rattly a little... so there goes military spec BS... they sound great though.. really great
0 x
"THIS should be played at high volume..preferably in a residential area"

User avatar
LeifH
Unrated
Posts: 24
Joined: Tue 10/06/09 2:00 am
Location: Unknown

Re: Filmosound 18Watt conversion, Help!

Post by LeifH »

Bieworm wrote:
Sat 03/27/21 3:25 pm
LeifH wrote:
Sat 03/27/21 1:01 pm
I'm as an experiment, I've ordered some 6P14P mil spec soviet made tubes from ebay.
8 for $20, gives me spares in case. First bit of reading, some claim that they are what the tube store label their preferred 7189s?

It gives me spares, which is what I'm missing.

As a back up if the 6P14P sound terrible a set of Tung Sol new production from the Tube Store, I needed some other parts, so I thought I'd try these as well.

In the mean time, I checked with a meter, I'm not getting any shorts between pins on the output sockets, looks like it was just the tube going bad, crap.
I have those 6p14p too on my 18 watts. One pair has gone microphonic... not bad, but rattly a little... so there goes military spec BS... they sound great though.. really great
LMAO

I guess the mil spec should have the accompanying binder with the name of the janitor who cleaned up before and after production as well as the days lunch menu.

Or it was made on a Wednesday ?

Thanks to all for the input, hope to have tubes by Wednesday, I would like my next post to be a clip of the wee beast in action.
2 x

User avatar
LeifH
Unrated
Posts: 24
Joined: Tue 10/06/09 2:00 am
Location: Unknown

Re: Filmosound 18Watt conversion, Help!

Post by LeifH »

I got the new tubes from the Tube Store today.
As I'm now a little paranoid about this. I had added screen resistors to my 5E3 when I built it on what seemed like everyone's recommendation as a little protection and to limit blocking distortion.

Is this a good idea on the lite iib? And, what size and wattage are preferred?

Again, thanks.
0 x

User avatar
JMPGuitars
Super Duper Admin
Super Duper Admin
Posts: 3954
Joined: Tue 09/18/12 8:00 pm
Location: South Central, MA
Contact:

Re: Filmosound 18Watt conversion, Help!

Post by JMPGuitars »

LeifH wrote:
Wed 03/31/21 5:08 pm
I got the new tubes from the Tube Store today.
As I'm now a little paranoid about this. I had added screen resistors to my 5E3 when I built it on what seemed like everyone's recommendation as a little protection and to limit blocking distortion.

Is this a good idea on the lite iib? And, what size and wattage are preferred?

Again, thanks.
The lite 2b already has screen resistors. If you're following my docs: files/JMPGuitars_18_Watt_Lite_2b_Schematic.pdf

...then it is sharing a 1K 3W screen resistor. You could use 2 separate 1K 3W resistors instead if you prefer.

The old doc versions had 100Ω screen resistors, but they should really be 1K.

Thanks,
Josh
0 x
'I installed a skylight in my apartment yesterday... The people who live above me are furious.' - Steven Wright

Modern Ground Schemes
Soldering Technique
B+ Voltage Reduction
Amplifier Tools & Parts Info


Web Design: DolceVittoria.com
Guitars / Amps / Effects: JMPGuitars.com
(anti)Social: Facebook · Instagram
Items for Sale

User avatar
LeifH
Unrated
Posts: 24
Joined: Tue 10/06/09 2:00 am
Location: Unknown

Re: Filmosound 18Watt conversion, Help!

Post by LeifH »

JMPGuitars wrote:
Wed 03/31/21 5:30 pm
LeifH wrote:
Wed 03/31/21 5:08 pm
I got the new tubes from the Tube Store today.
As I'm now a little paranoid about this. I had added screen resistors to my 5E3 when I built it on what seemed like everyone's recommendation as a little protection and to limit blocking distortion.

Is this a good idea on the lite iib? And, what size and wattage are preferred?

Again, thanks.
The lite 2b already has screen resistors. If you're following my docs: files/JMPGuitars_18_Watt_Lite_2b_Schematic.pdf

...then it is sharing a 1K 3W screen resistor. You could use 2 separate 1K 3W resistors instead if you prefer.

The old doc versions had 100Ω screen resistors, but they should really be 1K.

Thanks,
Josh
Thanks Josh, I'm not good at my words today.
Yes, I meant individual, for each tube. And does that provide better protection as well as blocking the isolation?
0 x

User avatar
JMPGuitars
Super Duper Admin
Super Duper Admin
Posts: 3954
Joined: Tue 09/18/12 8:00 pm
Location: South Central, MA
Contact:

Re: Filmosound 18Watt conversion, Help!

Post by JMPGuitars »

LeifH wrote:
Wed 03/31/21 6:06 pm
Thanks Josh, I'm not good at my words today.
Yes, I meant individual, for each tube. And does that provide better protection as well as blocking the isolation?
Words are hard sometimes, I hear ya. ;)

It's maybe better protection. Like if a resistor fails, then only one of the tubes will be directly affected, but I've never actually had that happen. I don't know what you mean by "blocking the isolation." I wouldn't overthink it. Either use two or use one, as long as you use 1K 3W, you're good.

Thanks,
Josh
0 x
'I installed a skylight in my apartment yesterday... The people who live above me are furious.' - Steven Wright

Modern Ground Schemes
Soldering Technique
B+ Voltage Reduction
Amplifier Tools & Parts Info


Web Design: DolceVittoria.com
Guitars / Amps / Effects: JMPGuitars.com
(anti)Social: Facebook · Instagram
Items for Sale

User avatar
LeifH
Unrated
Posts: 24
Joined: Tue 10/06/09 2:00 am
Location: Unknown

Re: Filmosound 18Watt conversion, Help!

Post by LeifH »

Sorry, that time I swear it was my stupidity. Not auto correct.

When I built my 5E3, as I recall, I was advised to put individual resistors on each tube to both prevent blocking distortion and help protect the tubes from each other. What i meant by isolation.

I wasn't sure about just one shared resistor both protecting the screens and helping to prevent blocking distortion.
I thought the blocking distortion was one tube pushing when it was supposed to be pulling or vice versa, ( out of phase) into the other tube via the screens?
0 x

User avatar
JMPGuitars
Super Duper Admin
Super Duper Admin
Posts: 3954
Joined: Tue 09/18/12 8:00 pm
Location: South Central, MA
Contact:

Re: Filmosound 18Watt conversion, Help!

Post by JMPGuitars »

LeifH wrote:
Thu 04/01/21 6:00 pm
Sorry, that time I swear it was my stupidity. Not auto correct.

When I built my 5E3, as I recall, I was advised to put individual resistors on each tube to both prevent blocking distortion and help protect the tubes from each other. What i meant by isolation.

I wasn't sure about just one shared resistor both protecting the screens and helping to prevent blocking distortion.
I thought the blocking distortion was one tube pushing when it was supposed to be pulling or vice versa, ( out of phase) into the other tube via the screens?
Read the maestro: https://www.aikenamps.com/index.php/wha ... distortion
2 x
'I installed a skylight in my apartment yesterday... The people who live above me are furious.' - Steven Wright

Modern Ground Schemes
Soldering Technique
B+ Voltage Reduction
Amplifier Tools & Parts Info


Web Design: DolceVittoria.com
Guitars / Amps / Effects: JMPGuitars.com
(anti)Social: Facebook · Instagram
Items for Sale

User avatar
LeifH
Unrated
Posts: 24
Joined: Tue 10/06/09 2:00 am
Location: Unknown

Re: Filmosound 18Watt conversion, Help!

Post by LeifH »

JMPGuitars wrote:
Thu 04/01/21 6:08 pm
LeifH wrote:
Thu 04/01/21 6:00 pm
Sorry, that time I swear it was my stupidity. Not auto correct.

When I built my 5E3, as I recall, I was advised to put individual resistors on each tube to both prevent blocking distortion and help protect the tubes from each other. What i meant by isolation.

I wasn't sure about just one shared resistor both protecting the screens and helping to prevent blocking distortion.
I thought the blocking distortion was one tube pushing when it was supposed to be pulling or vice versa, ( out of phase) into the other tube via the screens?
Read the maestro: https://www.aikenamps.com/index.php/wha ... distortion
He sure is, that was an explanation and a half. Thanks!
1 x

User avatar
LeifH
Unrated
Posts: 24
Joined: Tue 10/06/09 2:00 am
Location: Unknown

Re: Filmosound 18Watt conversion, Help!

Post by LeifH »

As an update, i received the NOS 6P14P and installed them. To my ear, and at lower volume it's running well. The 6P14P seem less chimey than the Tung-Sol's.
They sound good, more creamy.
Again, its in an apartment. Sadly, we've been in lockdown for the past month now, so going to the cottage to crank this up, ot getting to a jam hasn't happened.

Thanks to you the community for your help!
I can't wait to get this turned up beyond almost 2!
2 x

User avatar
Bieworm
Verbose Moderator
Verbose Moderator
Posts: 2287
Joined: Mon 02/10/20 8:24 am
Location: Belgium

Re: Filmosound 18Watt conversion, Help!

Post by Bieworm »

LeifH wrote:
Sun 05/09/21 5:24 pm
As an update, i received the NOS 6P14P and installed them. To my ear, and at lower volume it's running well. The 6P14P seem less chimey than the Tung-Sol's.
They sound good, more creamy.
Again, its in an apartment. Sadly, we've been in lockdown for the past month now, so going to the cottage to crank this up, ot getting to a jam hasn't happened.

Thanks to you the community for your help!
I can't wait to get this turned up beyond almost 2!
Leif... hope you're not expecting Mil Spec from these 6P14P tubes.. I already ahve a pair rattling at higher volume.. even with dampening rings.
0 x
"THIS should be played at high volume..preferably in a residential area"

User avatar
zaphod_phil
Builder, Admin
Builder, Admin
Posts: 15208
Joined: Wed 03/19/03 2:00 am
Location: YYZ

Re: Filmosound 18Watt conversion, Help!

Post by zaphod_phil »

LeifH wrote:
Sat 04/03/21 5:52 pm
JMPGuitars wrote:
Thu 04/01/21 6:08 pm
LeifH wrote:
Thu 04/01/21 6:00 pm
Sorry, that time I swear it was my stupidity. Not auto correct.

When I built my 5E3, as I recall, I was advised to put individual resistors on each tube to both prevent blocking distortion and help protect the tubes from each other. What i meant by isolation.

I wasn't sure about just one shared resistor both protecting the screens and helping to prevent blocking distortion.
I thought the blocking distortion was one tube pushing when it was supposed to be pulling or vice versa, ( out of phase) into the other tube via the screens?
Read the maestro: https://www.aikenamps.com/index.php/wha ... distortion
He sure is, that was an explanation and a half. Thanks!
The screen resistor arrangement is quite irrelevant to blocking distortion. The series resistor on the signal grid (g1) is intended to help with that.

Apart from that, I usually have the screen grids fed by individual 100 ohm resistors fed from a shared 1k resistor.
1 x
Nature abhors a clean tube amp

Post Reply