Thanks Josh, I'm not good at my words today.JMPGuitars wrote: ↑Wed 03/31/21 5:30 pmThe lite 2b already has screen resistors. If you're following my docs: files/JMPGuitars_18_Watt_Lite_2b_Schematic.pdfLeifH wrote: ↑Wed 03/31/21 5:08 pmI got the new tubes from the Tube Store today.
As I'm now a little paranoid about this. I had added screen resistors to my 5E3 when I built it on what seemed like everyone's recommendation as a little protection and to limit blocking distortion.
Is this a good idea on the lite iib? And, what size and wattage are preferred?
Again, thanks.
...then it is sharing a 1K 3W screen resistor. You could use 2 separate 1K 3W resistors instead if you prefer.
The old doc versions had 100Ω screen resistors, but they should really be 1K.
Thanks,
Josh
Yes, I meant individual, for each tube. And does that provide better protection as well as blocking the isolation?