How to fit and attach an 18 Watts chassis on a Combo or Head Enclosure
Moderators: zaphod_phil, Daviedawg, Graydon, CurtissRobin, colossal
- davemojo
- Occasional poster
- Posts: 161
- Joined: Wed 01/06/21 4:14 am
- Location: Hoofddorp
- Contact:
Re: How to fit and attach an 18 Watts chassis on a Combo or Head Enclosure
Hey Morning Biorn
You mentioned on the wiring photo suggestion to cut short the orange and seal it off with heat shrink tube and to twist together the brown gray wires, would they also need to be shortened and sealed off with heat shrink tube? Since they aren’t used?
Thanks
You mentioned on the wiring photo suggestion to cut short the orange and seal it off with heat shrink tube and to twist together the brown gray wires, would they also need to be shortened and sealed off with heat shrink tube? Since they aren’t used?
Thanks
0 x
- Bieworm
- Verbose Moderator
- Posts: 2302
- Joined: Mon 02/10/20 8:24 am
- Location: Belgium
Re: How to fit and attach an 18 Watts chassis on a Combo or Head Enclosure
The orange is not used. The grey and brown should be connected to each other. They connect 2 x 120V bobbins in series to create 230 or 240V primary.. depending on connecting the blue or white wire. Sodavemojo wrote: ↑Sun 05/09/21 12:27 amHey Morning Biorn
You mentioned on the wiring photo suggestion to cut short the orange and seal it off with heat shrink tube and to twist together the brown gray wires, would they also need to be shortened and sealed off with heat shrink tube? Since they aren’t used?
Thanks
1. Cut short the orange and seal it off
2. Cut short the grey and brown, strip the ends, tin them together and seal them off. You can also make the connection on a dedicated terminal.
1 x
"THIS should be played at high volume..preferably in a residential area"
- davemojo
- Occasional poster
- Posts: 161
- Joined: Wed 01/06/21 4:14 am
- Location: Hoofddorp
- Contact:
Re: How to fit and attach an 18 Watts chassis on a Combo or Head Enclosure
Hey All
I do Exactly know where OT wires for impendence go?
I suppose Yellow 4 Ohm on number 1 Green 8 Ohm on Number 2 and Orange 16 Ohm on number 3?
I do Exactly know where OT wires for impendence go?
I suppose Yellow 4 Ohm on number 1 Green 8 Ohm on Number 2 and Orange 16 Ohm on number 3?
You do not have the required permissions to view the files attached to this post.
0 x
- JMPGuitars
- Super Duper Admin
- Posts: 3965
- Joined: Tue 09/18/12 8:00 pm
- Location: South Central, MA
- Contact:
Re: How to fit and attach an 18 Watts chassis on a Combo or Head Enclosure
It doesn't matter as long as 8ohm is in the middle, and you know which is which. If you have a panel made with the numbers written, then you need to match that.
2 x
'I installed a skylight in my apartment yesterday... The people who live above me are furious.' - Steven Wright
Modern Ground Schemes
Soldering Technique
B+ Voltage Reduction
Amplifier Tools & Parts Info
Web Design: DolceVittoria.com
Guitars / Amps / Effects: JMPGuitars.com
(anti)Social: Facebook · Instagram
Items for Sale
Modern Ground Schemes
Soldering Technique
B+ Voltage Reduction
Amplifier Tools & Parts Info
Web Design: DolceVittoria.com
Guitars / Amps / Effects: JMPGuitars.com
(anti)Social: Facebook · Instagram
Items for Sale