WATKINS DOMINATOR CABINET

Seeing and hearing is believing

Moderators: CurtissRobin, colossal, zaphod_phil, Daviedawg, Graydon

User avatar
user669
Newbie
Newbie
Posts: 88
Joined: Wed 08/09/06 2:00 am
Location: Tennessee
Contact:

Post by user669 »

To create the channel for the piping I use a normal thickness ".125" saw blade. It is much easier in my option to make mistakes doing this with a router.

I will have plans showing how I make the dominator at some point. I hope this helps everyone!
0 x
Mike
Amp Cabinet Co.

User avatar
user669
Newbie
Newbie
Posts: 88
Joined: Wed 08/09/06 2:00 am
Location: Tennessee
Contact:

Post by user669 »

I am posting photos of the cabinet build on my site if anyone is interested. It is half way done. I know that some were wondering how I attached the front panels and I think these photos will give some insight on how its done.
0 x
Mike
Amp Cabinet Co.

User avatar
bennyk
Unrated
Posts: 9
Joined: Tue 03/28/06 2:00 am
Location: Catlett Va.

Re: WATKINS DOMINATOR CABINET

Post by bennyk »

Gentlemen,
I know this thread has been long buried, but I was wondering if anyone has the Dominator cabinet plan files that Mr.Mike from Amp Cabinet Company posted way back when? Not much info on these unless you want to buy a repro amp.I don't see them at the Wattkins amp site either. Would be nice if they were archived. Definitely a long shot, but I thought I'd ask. Thanks.

Benny
1 x

User avatar
crgfrench
Frequent poster
Frequent poster
Posts: 827
Joined: Fri 04/27/18 3:02 am

Re: WATKINS DOMINATOR CABINET

Post by crgfrench »

Here are the Plans
Screen Shot 2022-09-03 at 8.34.48 PM.png
Screen Shot 2022-09-03 at 8.35.10 PM.png
Screen Shot 2022-09-03 at 8.35.34 PM.png
You do not have the required permissions to view the files attached to this post.
0 x

Post Reply