And what would be a fair asking price? TIAI have a JBL D-131 that was reconed with a 2202 recone and paper dustcap, alnico magnet and 4" vc. The other mate for it have problems so it's a sole driver.
JBL D-131 reconed
Moderators: zaphod_phil, Daviedawg, Graydon, CurtissRobin, colossal
- MothAudio
- Unrated
- Posts: 1
- Joined: Wed 01/13/10 2:00 am
- Location: Unknown
JBL D-131 reconed
Does anyone know if the JBL D-131 speaker would be suitable for a lead guitar speaker. I have a friend with one that's been re-coned...
0 x
-
- Occasional poster
- Posts: 131
- Joined: Tue 12/06/05 2:00 am
- Location: ohio
JBL D-131
the D131 a full range 12",
http://www.harpamps.com/micKspeakers/Ea ... story.html
Make sure the VC slot is blasted clean, and the appropriate new cone is professionally installed.
Note [accding to the article] the speaker was reportedly the focus of redesign to correct mounting and surround problems...not sure what the deal with the mounting problem was...I'd chance dealing with the mounting a freshly reconed 12'' JBL guitar speaker.
the D131 a full range 12",
http://www.harpamps.com/micKspeakers/Ea ... story.html
Make sure the VC slot is blasted clean, and the appropriate new cone is professionally installed.
Note [accding to the article] the speaker was reportedly the focus of redesign to correct mounting and surround problems...not sure what the deal with the mounting problem was...I'd chance dealing with the mounting a freshly reconed 12'' JBL guitar speaker.
0 x