Front panel veneer material available
Moderators: zaphod_phil, Daviedawg, Graydon, CurtissRobin, colossal
-
- Occasional poster
- Posts: 229
- Joined: Mon 08/08/05 2:00 am
- Location: West Palm Beach
Front panel veneer material available
I have some REAL nice veneers that would make great control panels for amps. Most is 2" wide various lengths, some up to 4" wide. Some may be big enough for entire face of amp.
Backed with paper approx 1/32" thick or wood approx. 1/16".
Walnut, walnut burl, zebra wood(some call it ebony - tan with dark strips), quarter-sawn teak, maple and oak. Burl about $20.00 the rest $10.00.
Contact me at adavisguitar.com and I can send photos and perhaps discuss sizes available.
I'll donate whatever I make above shipping to 18watt.com
Backed with paper approx 1/32" thick or wood approx. 1/16".
Walnut, walnut burl, zebra wood(some call it ebony - tan with dark strips), quarter-sawn teak, maple and oak. Burl about $20.00 the rest $10.00.
Contact me at adavisguitar.com and I can send photos and perhaps discuss sizes available.
I'll donate whatever I make above shipping to 18watt.com
0 x
- ricardorx
- Unrated
- Posts: 4
- Joined: Fri 11/17/06 2:00 am
- Location: Unknown