Cabinet for 18 watt Combo build
Moderators: zaphod_phil, Daviedawg, Graydon, CurtissRobin, colossal
- bograve
- Newbie
- Posts: 33
- Joined: Mon 01/15/07 2:00 am
- Location: Denmark
- Contact:
Cabinet for 18 watt Combo build
I made a cabinet for my "Marshall 1930 Popular" Here are drawings of each plate parts both as "PDF" and "DWG" files that can be downloaded.
http://www.bolimbo.dk/off/1930/kabinet1.pdf
http://www.bolimbo.dk/off/1930/kabinet2.pdf
http://www.bolimbo.dk/off/1930/kabinet1.dwg
Here are some pictures of cabinet manufacturing:
The cabinet is covered with Denim for pant production. The clothes are glued and nailed to the cabinet.
http://www.bolimbo.dk/off/1930/kabinet1.pdf
http://www.bolimbo.dk/off/1930/kabinet2.pdf
http://www.bolimbo.dk/off/1930/kabinet1.dwg
Here are some pictures of cabinet manufacturing:
The cabinet is covered with Denim for pant production. The clothes are glued and nailed to the cabinet.
0 x
-
- Senior Amp Tech
- Posts: 826
- Joined: Mon 04/21/08 2:00 am
- Location: Podunk, Idaho
- Contact:
-
- Frequent poster
- Posts: 914
- Joined: Mon 12/10/07 2:00 am
- Location: Melb, Aust
- Contact:
-
- Occasional poster
- Posts: 224
- Joined: Thu 05/12/05 2:00 am
- Location: Upstate, NY
- ricardorx
- Unrated
- Posts: 4
- Joined: Fri 11/17/06 2:00 am
- Location: Unknown
-
- Occasional poster
- Posts: 173
- Joined: Fri 02/15/08 2:00 am
- Location: Unknown
-
- Senior Amp Tech
- Posts: 1169
- Joined: Sat 08/09/08 2:00 am
- Location: Columbia River Gorge, Oregon Side
Re: Cabinet for 18 watt Combo build
I like that! And I also like the denim covering. I'll have to consider that if I build another.
KennyO
KennyO
0 x
- bograve
- Newbie
- Posts: 33
- Joined: Mon 01/15/07 2:00 am
- Location: Denmark
- Contact:
Re: Cabinet for 18 watt Combo build
Hi andrekp!
I took the picture before The handel, and when I went to pick it up I realized that something was missing!....
I have built another amp using the same drawings for the cabinet. And here you can see the result.
I took the picture before The handel, and when I went to pick it up I realized that something was missing!....
I have built another amp using the same drawings for the cabinet. And here you can see the result.
Last edited by bograve on Fri 03/07/14 11:47 am, edited 1 time in total.
0 x
- bograve
- Newbie
- Posts: 33
- Joined: Mon 01/15/07 2:00 am
- Location: Denmark
- Contact:
Re: Cabinet for 18 watt Combo build
I know that I'm right on the edge with this post here on 18watt.com. But the amplifier I have built is originally based on Marshall 1930 Popular, which belong to this forum. I ended up using 2 x ECL82 in the output stage, and 1 ECC82 and 1 EF83 in the preamp stage.
Here is a link to my website with a description of the project:
http://bolimbo.dk/guitarer/forstaerkere ... nglish.htm
Here is a link to my website with a description of the project:
http://bolimbo.dk/guitarer/forstaerkere ... nglish.htm
0 x