Crazy idea.. how to make a Matchless-style glowing faceplate
Moderators: zaphod_phil, Daviedawg, Graydon, CurtissRobin, colossal
-
- Unrated
- Posts: 8
- Joined: Thu 10/25/07 2:00 am
- Location: Birmingham AL
Thanks, very much appreciated! Sorry for the delay in getting back to this post.
The resistor for the blue LED is 1.5k and I can't recall the value for the red one. It's on my schematic at home. Probably somewhere between 1-2k
Here's a photo of the faceplate on the original amp. I've since changed the trim on the metal grill to flat, 2.5 mm aluminum strips to better match, and changed the screws to what I call "gun metal finish" which is actually called "antique brass."
BTW, thanks for posting the link to the Matchless tour. That's inspiring!
The resistor for the blue LED is 1.5k and I can't recall the value for the red one. It's on my schematic at home. Probably somewhere between 1-2k
Here's a photo of the faceplate on the original amp. I've since changed the trim on the metal grill to flat, 2.5 mm aluminum strips to better match, and changed the screws to what I call "gun metal finish" which is actually called "antique brass."
BTW, thanks for posting the link to the Matchless tour. That's inspiring!
0 x
- ricardorx
- Unrated
- Posts: 4
- Joined: Fri 11/17/06 2:00 am
- Location: Unknown
Re: Crazy idea.. how to make a Matchless-style glowing facep
alguem chegou a executar o painel luminoso para o marshall?
0 x
- zaphod_phil
- Builder, Admin
- Posts: 15208
- Joined: Wed 03/19/03 2:00 am
- Location: YYZ
Re: Crazy idea.. how to make a Matchless-style glowing facep
Using Google Translate I worked out that the question was in Portugese, and says something along the lines of, "anybody done a light panel for marshall?"
Anyone want to comment?
Anyone want to comment?
0 x
Nature abhors a clean tube amp
-
- Newbie
- Posts: 87
- Joined: Fri 10/07/05 2:00 am
- Location: Jax, Florida
Re: Crazy idea.. how to make a Matchless-style glowing facep
Here's how Paul Ruby did it on his Miriam amp:
You do not have the required permissions to view the files attached to this post.
0 x