thanks
6u10
Moderators: colossal, zaphod_phil, CurtissRobin
- jimipage
- Occasional poster

- Posts: 496
- Joined: Thu 02/23/06 2:00 am
- Location: way out West
- Contact:
6u10
I was rifling through my collection of tubes and I stumbled upon a 6u10 that I acquired a few years back as a replacement for the one in my Reverberocket. Decided to go look up the data and discovered that it appears to be a triple triode, with two sections close to a 12au7 and the 3rd section like a 12ax7. Does anybody have any experience with these? Could this be used as a preamp tube, or for the PI? Any suggestions would be welcome.
thanks
thanks
0 x
- jimipage
- Occasional poster

- Posts: 496
- Joined: Thu 02/23/06 2:00 am
- Location: way out West
- Contact:
- rectifier
- Frequent poster

- Posts: 736
- Joined: Mon 02/20/06 2:00 am
- Location: Swamp
The Super Champ uses a 6C10 which is similar to the 6U10 (both triple triode compactrons) except it has the characteristics of a 12AX7 with three triodes. In the Super Champ circuit, the tube is being used as the phase inverter and the other triode is for reverb recovery.
0 x
Time waits for no one...so play yer guitar whenever you can!
