Let's just say....

Double-Bubble! Place for discussing the 36W version...

Moderators: colossal, zaphod_phil, CurtissRobin, Daviedawg, Graydon

Post Reply
User avatar
Chubsman
Frequent poster
Frequent poster
Posts: 974
Joined: Fri 11/25/05 2:00 am
Location: Ottawa, ON - Canada

Let's just say....

Post by Chubsman »

Let's say I am a crazy bastard... and I wanted to ADD a tremolo to one of the 2 channels on my 36w TMB. I would add the Intensity and speed on the back of the amp and have a footswitch to turn it on and off...

How hard would it be?
Do I need to add a tube?
0 x

krash
Frequent poster
Frequent poster
Posts: 557
Joined: Mon 02/27/06 2:00 am
Location: Austin, TX
Contact:

Post by krash »

probably not THAT hard. but far easier to do it with a pedal :)

TR-2 only costs like $40 and sounds good.

you would have to add 1/2 of a tube at least, as well as quite a few extra components. it will present layout challenges to say the least considering you are already using the whole board.
0 x

User avatar
tw001_tw
Occasional poster
Occasional poster
Posts: 201
Joined: Mon 07/04/05 2:00 am
Location: St. Louis

Post by tw001_tw »

Chubsman -
this may or may not help you. I read your post earlier, and I'm looking
for a schematic to reference something, saw this, and remebered your
post.

one knob ??

It might help you get started thinking in the right direction though.
Looks like the trem. curcuit is just sitting down there all by itself.

http://www.drtube.com/schematics/gibson/ga-1rt.gif

good luck
-tw
0 x

Mr_dB
Verbose poster
Verbose poster
Posts: 1506
Joined: Wed 11/17/04 2:00 am
Location: central Arkansas

Re: Let's just say....

Post by Mr_dB »

Chubsman wrote:Let's say I am a crazy bastard... and I wanted to ADD a tremolo to one of the 2 channels on my 36w TMB. I would add the Intensity and speed on the back of the amp and have a footswitch to turn it on and off...

How hard would it be?
Do I need to add a tube?
You could do a "bias-wiggler" tremolo as used in the Princeton-Amp, Princeton Reverb-Amp, or Vox Cambridge/Berkeley. Then tack on an extension chassis sort of like the Vox Top Boost add-on.

This would affect both channels though.
0 x

User avatar
blaren
Occasional poster
Occasional poster
Posts: 362
Joined: Fri 11/11/05 2:00 am
Location: Whitecourt, Alberta Canada
Contact:

Re: Let's just say....

Post by blaren »

Chubsman wrote:Let's say I am a crazy bastard... and I wanted to ADD a tremolo to one of the 2 channels on my 36w TMB. I would add the Intensity and speed on the back of the amp and have a footswitch to turn it on and off...

How hard would it be?
Do I need to add a tube?
How could anyone pass this up?
OK...you're a crazy bastard!!!!
0 x

User avatar
Chubsman
Frequent poster
Frequent poster
Posts: 974
Joined: Fri 11/25/05 2:00 am
Location: Ottawa, ON - Canada

Post by Chubsman »

Thanks Blaren! Where have you been... out convertabling...
0 x

User avatar
blaren
Occasional poster
Occasional poster
Posts: 362
Joined: Fri 11/11/05 2:00 am
Location: Whitecourt, Alberta Canada
Contact:

Post by blaren »

yeah...I may have just a touch of OCD...there's an oxymoron for ya...slight OCD.
When I get into something I get RIGHT into it. It's been car this and car that...instead of checking guitars and amps on ebey I been checking turbos and stuff.
Instead of checking-in here, I been at the car forums.
I got a girlfriend and...well...I moved her in.
Please ...no speaches or condolences.
Like I said in another thread, been doing a LOT of playing ...just no tweeking ;).
Bar season is soon upon us though and so it's time to get (finally) the 36w working properly (WITH 1/2 popwer switch).
It's grocery shopping time right now though so...probably tomorrow I'll start bugging everyone for the latest layout and mods and info.
Later bruthas
0 x

Post Reply