Computer modeling a 36 watt head.

[lespauljr]

I will be starting with the turret board and model the entire chassis. Before I begin, I need some kindly person to supply me with the physical dimensions of a typical turret board for this project in inches please. Also is there a typical specification for the turrets?

Later on when I am modeling the tubes I will be needing a reference site that has dimensions for them as well. I can pretty much go to my parts bin for the resistors and capacitors and such and measure them directly.

Thanks to all for helping me out.
Dan

[fromscratch]

What format?
I have to dig...but I think I still have my trem board in .dwg
I'll export as whatever you want if you need it.
Mike

[lespauljr]

If you are talking about the board, I just need dimensions in inches width and length and thickness.

I can read a dwg file so if you have one handy that too is ok.

Thanks, I appreciate your help.
Dan

[fromscratch]

Sorry about the delay......
Moved to a different computer and forgot that I needed to get FTP software installed.

For compatability, I put it out there as a .dxf and an .igs
Hope that helps you out.
Mike
http://pages.prodigy.net/nellco/18watteyeletboard.dxf
http://pages.prodigy.net/nellco/18watteyeletboard.igs

[fromscratch]

http://pages.prodigy.net/nellco/18watteyeletboard.jpg
Try that also
Mike