Colin,
Haven't logged on in a little while, so I'm glad your Group amp made it to Scotland at long last. I'll look forward to hearing clips of it at full throttle!
Andy
Any news on Colin's comparison of old amp and new?
Moderators: zaphod_phil, Daviedawg, Graydon, CurtissRobin, colossal
-
Graydon
- Admin, Charter Member
- Posts: 1619
- Joined: Fri 01/31/03 2:00 am
- Location: USA
- Contact:
Guys,
I received Colin's CDs with the clips of the real 18W and the red levant "Colin" clone 18W. (Thanks Colin)
The two CDs sound nearly identical! I am a little surprised frankly that the clone has as much bottom as it does. Maybe that speaker is breaking in well. I thought that the Weber speaker was a little too bright but the recording doesn't show that at all.
I am going to be out of town all of this week, and we are moving next weekend, so I will not likely be able to do anything with the CDs until a couple weeks down the road at least.
I also will likely not have good access to email so if you need me, be patient until at least next weeknd. I'll try to check emails when I get in on Friday before I tear the computer down for the trek to the new house. Then, I don't know how long it will take to get the new ISP setup.
I received Colin's CDs with the clips of the real 18W and the red levant "Colin" clone 18W. (Thanks Colin)
The two CDs sound nearly identical! I am a little surprised frankly that the clone has as much bottom as it does. Maybe that speaker is breaking in well. I thought that the Weber speaker was a little too bright but the recording doesn't show that at all.
I am going to be out of town all of this week, and we are moving next weekend, so I will not likely be able to do anything with the CDs until a couple weeks down the road at least.
I also will likely not have good access to email so if you need me, be patient until at least next weeknd. I'll try to check emails when I get in on Friday before I tear the computer down for the trek to the new house. Then, I don't know how long it will take to get the new ISP setup.
0 x