Anyone built a EL34 PP w/ EF86 or 6SJ7 preamp? Schematic?
Moderators: zaphod_phil, Daviedawg, Graydon, CurtissRobin, colossal
- tarzanalog
- Frequent poster
- Posts: 864
- Joined: Mon 11/13/06 2:00 am
- Location: Quad Cities, USA
Anyone built a EL34 PP w/ EF86 or 6SJ7 preamp? Schematic?
Done tweaking my 36W and thinking about next project. A buddy (blues player) wants me to build him a PP EL34 amp with a pentode preamp. (He loves the EF86 channel on my Ceriatone.) I'll help him out, but only if I can incorporate my desire to build a version of the "Octal Fatness" amp only with the PP power section?
Any suggestions?
Any suggestions?
0 x
- zaphod_phil
- Builder, Admin
- Posts: 15208
- Joined: Wed 03/19/03 2:00 am
- Location: YYZ
- briane
- Occasional poster
- Posts: 229
- Joined: Fri 06/23/06 2:00 am
- Location: seattle
-
- Occasional poster
- Posts: 253
- Joined: Sun 04/09/06 2:00 am
- Location: USA
Here is a schematic of an amp using the 6SJ7 in the preamp and 6SL7 for the PI, It runs 6V6's in the PA.
Last edited by Bluesmechanic on Tue 05/01/07 5:32 pm, edited 1 time in total.
0 x
- zaphod_phil
- Builder, Admin
- Posts: 15208
- Joined: Wed 03/19/03 2:00 am
- Location: YYZ
- tarzanalog
- Frequent poster
- Posts: 864
- Joined: Mon 11/13/06 2:00 am
- Location: Quad Cities, USA
- tarzanalog
- Frequent poster
- Posts: 864
- Joined: Mon 11/13/06 2:00 am
- Location: Quad Cities, USA
What's the best way to go to do a minimalist build of this idea.
1 input, Pentode preamp, 6-position tone switch like my 36W, recovery triode, PI, EL34s, OT?
Gonna order the iron I need from the MM group buy and I'm welcoming ideas on the best set of iron for the job.
It'll have to be a head so the multi-tap OT is a MUST. What's the feeling on UL?
Thanks in advance!!!
1 input, Pentode preamp, 6-position tone switch like my 36W, recovery triode, PI, EL34s, OT?
Gonna order the iron I need from the MM group buy and I'm welcoming ideas on the best set of iron for the job.
It'll have to be a head so the multi-tap OT is a MUST. What's the feeling on UL?
Thanks in advance!!!
0 x