Valve junior specifications needed!

[dancindave]

hey y'all, can someone measure on their head chassis for these three things:1) The positions of the screw mounting holes, I.e, distance from the edges to the mounting hole.
2) The width of the flanges on the chassis
3) The size of the screws used for mounting. I have an exciting project I want to unveil and need these measurements to finish up. thank you!!

[dancindave]

and yes, i do own one, but circumstances have me about 150 miles away from both the head and measuring tools, so any help would be rewarded in the afterlife....

[unchained]

I'll post them when I get home.

[dancindave]

Thank you!!!

[guitbusy]

position of the screw mounting holes = 1.133 inches there is a little play as there is a threaded insert, similiar to what is put in an audio rack, in a square cut out(this is measure from the width end)

flange width on mine = .781 inches

size of the screws = unfortunately I can't find my mounting screws right now, maybe someone else can help out while I look.

[guitbusy]

position of the screw mounting holes = 1.133 inches there is a little play as there is a threaded insert, similiar to what is put in an audio rack, in a square cut out(this is measure from the width end)

flange width on mine = .781 inches

size of the screws = unfortunately I can't find my mounting screws right now, maybe someone else can help out while I look.

[Bulatovic]

i have measured it now, it says something like 7/32" diametar, 1"5/16 from tip to the tip (top of the head to the end of the screw) and the whole thing w/o head is 1"1/8 long.

Hope it helps

[dancindave]

thanks guys. this really helps me out!!