Reverb in a 5C5
Moderators: zaphod_phil, Daviedawg, Graydon, CurtissRobin, colossal
- guitarsndrums
- Unrated
- Posts: 21
- Joined: Sat 10/15/05 2:00 am
- Location: All over the place
Reverb in a 5C5
OK, I am building a 5C5 for my first build simply because I have all the components readily available. I would like to add reverb (spring) to this circuit. What would be the best way to go about it. This is a 2 channel 4 input design. Could one of the channels be eliminated and the remaining tube be used. If so where can I find a basic circuit for a spring reverb.
Any thoughts would be appreciated.
Bruce
Any thoughts would be appreciated.
Bruce
0 x
-
- Verbose poster
- Posts: 1335
- Joined: Fri 10/22/04 2:00 am
- Location: calgary alberta canada
- Contact:
Go to www.hoffmanamps.com and look under his 'library of information'.He has the layout there to do what you need.You need 1-1/2 triodes to get the reverb working,so you may have to add one tube.
0 x
- guitarsndrums
- Unrated
- Posts: 21
- Joined: Sat 10/15/05 2:00 am
- Location: All over the place