The main schematic shows a range of values for components c2, c3 and r5. I'll be using the Heyboer power and output tranformers and the "standard" schematic in my clone (first build). Just wonderin' if there's any general consensus of thought on what values I should use (or try first).Schematic component values c2, c3, r5
Moderators: zaphod_phil, Daviedawg, Graydon, CurtissRobin, colossal
-
ab3640au
- Frequent poster
- Posts: 535
- Joined: Mon 03/24/03 2:00 am
- Location: Melbourne, Australia
Schematic component values c2, c3, r5
The main schematic shows a range of values for components c2, c3 and r5. I'll be using the Heyboer power and output tranformers and the "standard" schematic in my clone (first build). Just wonderin' if there's any general consensus of thought on what values I should use (or try first).
0 x