hammond and heyboer
Moderators: zaphod_phil, Daviedawg, Graydon, CurtissRobin, colossal
- Danhei
- Unrated
- Posts: 13
- Joined: Thu 06/05/03 2:00 am
- Location: USA
hammond and heyboer
Hi All,
I'm new here and in the process of assembling an 18 watt. I was wondering about the hammond 125E vs. the heyboer for the output tranny. Has anyone done a back to back comparison of the two? I know most have said the heyboer is the way to go. I'm not sure how to order it, however. That's why I was asking about the hammond. I tried emailing Graydon but got no response. I emailed heyboer and they sent me Graydon's web page and said that small orders went through him. The web page:
http://elektro.cmhnet.org/~graydon/18wattmain.html
appears to be down (I keep getting a connection refused message).
I'd like to get this project together and I've never had problems ordering hammond's before.
Thanks for any help,
Dan
I'm new here and in the process of assembling an 18 watt. I was wondering about the hammond 125E vs. the heyboer for the output tranny. Has anyone done a back to back comparison of the two? I know most have said the heyboer is the way to go. I'm not sure how to order it, however. That's why I was asking about the hammond. I tried emailing Graydon but got no response. I emailed heyboer and they sent me Graydon's web page and said that small orders went through him. The web page:
http://elektro.cmhnet.org/~graydon/18wattmain.html
appears to be down (I keep getting a connection refused message).
I'd like to get this project together and I've never had problems ordering hammond's before.
Thanks for any help,
Dan
0 x
- Graydon
- Admin, Charter Member
- Posts: 1619
- Joined: Fri 01/31/03 2:00 am
- Location: USA
- Contact:
Hi,
I'm here, but my elektro isp is not working. You can reach me through my graydon@gdsamps.com account.
Sorry for the confusion.
I'm here, but my elektro isp is not working. You can reach me through my graydon@gdsamps.com account.
Sorry for the confusion.
0 x
-
- Frequent poster
- Posts: 977
- Joined: Fri 03/14/03 2:00 am
- Location: USA
- Contact:
I have used the heybour and EMC trannies and both sound good to me. I did use a 125E on a 5E3 build that I did for a friend and that amp was one of the most touch responsive amps I have played. Not being the guru like many on this board, I wonder if it was the fender/6V6 thing with the 125E.
Norm
Norm
0 x
- zaphod_phil
- Builder, Admin
- Posts: 15208
- Joined: Wed 03/19/03 2:00 am
- Location: YYZ
Ross Hughes' OT Comparison
FYI, check out this excellent OT comparisons by Ross Hughes from the old 18watt site, I posted into the following thread:
http://www.18watt.com/modules.php?name= ... opic&t=304
http://www.18watt.com/modules.php?name= ... opic&t=304
0 x