36w tmb speaker???
Moderators: zaphod_phil, Daviedawg, Graydon, CurtissRobin, colossal
-
- Newbie
- Posts: 33
- Joined: Sat 08/01/09 2:00 am
- Location: California
36w tmb speaker???
I need help choosing the impedance on my 36 watt. I am not really sure what the difference is.
0 x
-
- Verbose poster
- Posts: 1070
- Joined: Thu 09/11/08 2:00 am
- Location: MD
-
- Newbie
- Posts: 33
- Joined: Sat 08/01/09 2:00 am
- Location: California
I have built a 1x12 cab so I am gonna stick with one. I was thinking of getting a greenback but now I see that the wattage is too low on that. How about this one? http://tubedepot.com/sp-cel-vintage30.html?
the one pictured is 8ohm, but I would get the 16.
the one pictured is 8ohm, but I would get the 16.
0 x
-
- Verbose poster
- Posts: 1070
- Joined: Thu 09/11/08 2:00 am
- Location: MD
Most people don't like Vintage 30s with these amps. Do a search on here for Eminence speakers and check out their website. You'll find a lot of good information. Warehouse Speakers also makes a high-power version of the G12H30 called the Reaper HP. Haven't heard that one myself but I've liked their other speakers.
0 x
-
- Newbie
- Posts: 33
- Joined: Sat 08/01/09 2:00 am
- Location: California
i was really wanting to go with celestion. I may be able to fit 2 12's in my cab but I'll have to measure.
Or....would 2x10 be a strange thing to do? http://tubedepot.com/sp-cel-tube10.html
Or....would 2x10 be a strange thing to do? http://tubedepot.com/sp-cel-tube10.html
0 x
-
- Verbose poster
- Posts: 1070
- Joined: Thu 09/11/08 2:00 am
- Location: MD
Some of the original 18W amps were 2x10. The new 10" Greenback is supposed to be very nice. The "Tube 10" is a junk speaker.
Frankly, Celestion doesn't make a single good speaker rated over 30W. Why are you hung up on Celestion? All of their sub-$200 speakers are made in China these days anyways.
Frankly, Celestion doesn't make a single good speaker rated over 30W. Why are you hung up on Celestion? All of their sub-$200 speakers are made in China these days anyways.
0 x
-
- Newbie
- Posts: 33
- Joined: Sat 08/01/09 2:00 am
- Location: California
- colossal
- Moderator
- Posts: 450
- Joined: Thu 05/10/07 2:00 am
- Location: Moving through Kashmir
Just my $0.02 and take it for what it's worth, but I think you would be happiest with a 2x12 arrangement with your 36W; both for the power rating requirement but also tone. A pair of Celestion Greenbacks (G12M-25W) or, as krx mentioned, a Greenback paired with a Celestion GH1230 would really give you The Tone. The latter pairing is quite popular with a lot of guys and the two speakers compliment one another very well. I have an Avatar Contemporary closed back 2x12 cab loaded with re-issue Greenbacks that has fantastic breakup and is quite warm and springy. You can really hear the speakers work and compress wonderfully when you palm-mute low chords or notes. The closed back keeps them from "flubbing out" however the cabinet is quite beamy.macombaland wrote:i was really wanting to go with celestion. I may be able to fit 2 12's in my cab but I'll have to measure.
You're going to get more girth out of a 12" speaker. I think a 2x10 might be a bit shrill but perhaps others would have a different take.macombaland wrote:Or....would 2x10 be a strange thing to do?
Good luck.
0 x
-
- Verbose poster
- Posts: 1070
- Joined: Thu 09/11/08 2:00 am
- Location: MD
Warehouse and Eminence (and Mojo and Weber) are all making great speakers in the USA. Celestion has some good speakers, too, but they generally cost more and are made in China.
Scumback is another line you might consider. They're widely considered superior vintage reproductions of the classic Celestion speakers AND they're available in higher power versions (and they're more expensive than most other speakers). From what I understand, Scumbacks are made by Weber. Do a search on here for lots more info.
Scumback is another line you might consider. They're widely considered superior vintage reproductions of the classic Celestion speakers AND they're available in higher power versions (and they're more expensive than most other speakers). From what I understand, Scumbacks are made by Weber. Do a search on here for lots more info.
0 x
-
- Verbose poster
- Posts: 1070
- Joined: Thu 09/11/08 2:00 am
- Location: MD
I disagree. 10" speakers can be thick and fat with no shrillness and 12" can be thin and harsh. All depends on the speaker.colossal wrote:You're going to get more girth out of a 12" speaker. I think a 2x10 might be a bit shrill but perhaps others would have a different take.macombaland wrote:Or....would 2x10 be a strange thing to do?
Also, I personally far prefer an open-back cab to a closed back. Depends on your style though.
0 x
- zaphod_phil
- Builder, Admin
- Posts: 15208
- Joined: Wed 03/19/03 2:00 am
- Location: YYZ
Yes, not all 10-inch speakers are alike (nor are 12-inchers), so we can't generalise. The original Marshall 18W also came in a 2X10 combo version, But Tube 10s aren't what most people would rate as a particularly good speakers - I'm trying hard not to call hem c**p. If you want a Celestion 10-incher, the 10" version of the Greenback, the G10 would be the one to go for - http://professional.celestion.com/guita ... .asp?ID=33 Also Eminence and Weber both make some real butt-kicking British style 10" speakers.
Edit: Oops - I just realised that krx posted pretty much the same thing!
Warehouse Speakers are also effectively clones of Celestions, that many would rate as better then their current-production Celestion equivalents. They're also very competitive on price.
Edit: Oops - I just realised that krx posted pretty much the same thing!
Scumback do some very accurate reproductions of certain iconic vintage Celestion speakers that you can't buy today. FYI the magnet/basket assemblies come from Weber, but AFAIK they're actually assembled by Scumback, using special cones.krx wrote:Scumback is another line you might consider. They're widely considered superior vintage reproductions of the classic Celestion speakers AND they're available in higher power versions (and they're more expensive than most other speakers). From what I understand, Scumbacks are made by Weber. Do a search on here for lots more info.
Warehouse Speakers are also effectively clones of Celestions, that many would rate as better then their current-production Celestion equivalents. They're also very competitive on price.
However, don't forget the 50W Alnico Gold - but that one is mucho dinero.krx wrote:Frankly, Celestion doesn't make a single good speaker rated over 30W.
0 x
Nature abhors a clean tube amp
-
- Verbose poster
- Posts: 1070
- Joined: Thu 09/11/08 2:00 am
- Location: MD
-
- Occasional poster
- Posts: 200
- Joined: Wed 09/06/06 2:00 am
- Location: Out and About
The Cannabis Rex is ideal for this. Not a lot of $$$ and delivers the goods with a 36 watter. With the 102 db sensitivity it's REALLY LOUD as well, for those who care about such things.krx wrote:The 16 Ohm tap will generally give you a fuller bandwidth (i.e. better) sound than the lower impedance taps. Two hms in series will get you there (G12H30s or Greenbacks are popular), or use a single 16-Ohm rated for 50+ Watts (some good choices from Eminence).
Yes, I agree again. I have had both. The Red Fang covers the same territiory really well for less $$$.krx wrote:Yeah, I'd just buy a Red Fang if I wanted a 50W Blue.zaphod_phil wrote:However, don't forget the 50W Alnico Gold - but that one is mucho dinero.krx wrote:Frankly, Celestion doesn't make a single good speaker rated over 30W.
0 x
-
- Occasional poster
- Posts: 481
- Joined: Tue 07/08/08 2:00 am
My 2c:
I have several British-made V30's that I have broken in on the Variac. They sound way better than 200 dollar speakers by the same maker IMO. They don't sound quite so good until you're pushing them, they don't like being played quietly. In an average band scenario they are the only speaker I can make work with an 18 watt amp. The "classic" choices just fall appart when I try them.
P.S. Not all sub 200-dollar Celestions speakers are made in china. If you buy through Mesa, you're good because they will not handle any of the China Celestions.
-Paul
I have several British-made V30's that I have broken in on the Variac. They sound way better than 200 dollar speakers by the same maker IMO. They don't sound quite so good until you're pushing them, they don't like being played quietly. In an average band scenario they are the only speaker I can make work with an 18 watt amp. The "classic" choices just fall appart when I try them.
P.S. Not all sub 200-dollar Celestions speakers are made in china. If you buy through Mesa, you're good because they will not handle any of the China Celestions.
-Paul
0 x
-
- Verbose poster
- Posts: 1070
- Joined: Thu 09/11/08 2:00 am
- Location: MD
All Celestions except the Heritage and alnico models are made in China now. They might be doing some OEM speakers in England still, but everything else is made in China.PaulBlandford wrote:My 2c:
I have several British-made V30's that I have broken in on the Variac. They sound way better than 200 dollar speakers by the same maker IMO. They don't sound quite so good until you're pushing them, they don't like being played quietly. In an average band scenario they are the only speaker I can make work with an 18 watt amp. The "classic" choices just fall appart when I try them.
P.S. Not all sub 200-dollar Celestions speakers are made in china. If you buy through Mesa, you're good because they will not handle any of the China Celestions.
-Paul
If you're a metal guy you might like V30s. If you want any kind of "vintage" sound at all though, stay very far away.
0 x
- zaphod_phil
- Builder, Admin
- Posts: 15208
- Joined: Wed 03/19/03 2:00 am
- Location: YYZ
Heh, Paul is real cool blues player. So he's working somewhat outside of the box, as well as being one of the very few people who likes V30s with an 18W - you can pretty much count them on the finger's of one hand after a couple have been amputated. But variety is what makes life interesting. A key point is that Paul is talking about Mezza's OEM V30s, which are somewhat mellower than the usual kind - maybe to help offset some harshness of a typical Mezza DR or TR amp. I've played through a set of these in a studio near me, so I can vouch for their mellowness.
According to an e-mail I got from "Dr Decibel", basically any speakers being produced in lower quantities - hence the Alnico, Neodymium and Heritage range, plus a few OEM orders, presumably such as Mezza's, are made in England. There are also some OEM Alnico Blues being made in China now, specifically for Chinese-built Vox amps. I've read that they have a slightly smoother top end than the regular Blues, which makes me want to try some.krx wrote:All Celestions except the Heritage and alnico models are made in China now. They might be doing some OEM speakers in England still, but everything else is made in China.
0 x
Nature abhors a clean tube amp
- kyoungsteadt
- Occasional poster
- Posts: 349
- Joined: Tue 05/30/06 2:00 am
- Location: Unknown
-
- Frequent poster
- Posts: 705
- Joined: Fri 01/25/08 2:00 am
- Location: Highlands and Islands Apparently
- Contact:
After trying several different Celestion speakers at different volumes I would say most speakers sound rubbish at really low volumes… or maybe its just the way my ear interprets it.. but rubbish it stays.. you have to turn them up a little at least to really get decent tone.PaulBlandford wrote:My 2c:
They don't sound quite so good until you're pushing them, they don't like being played quietly.
-Paul
Mike
0 x