ecl86

sirgary · Post by **sirgary** » Tue 01/19/10 12:05 pm

Hi I need 2 pairs of springs and fittings for the above valves in my
1930 marshall combo. Any ideas where to get them.
Thanks
Gary

Post by **zaphod_phil** » Tue 01/19/10 1:58 pm

I guess you mean the retaining clips. I think you can use the same ones for ECL86/6GW8s as for EL84s, as they're about the same size.

If you want more specific advice about where to buy from, you'll need to give us some clues about where your location.

In case anyone's wondering, the 1930 is the Marshall 18W's kid brother. The design is very similar to the 18W Tremolo channel, using a pair of ECL86s for the PI and power stages.

sirgary · Post by **sirgary** » Tue 01/19/10 3:45 pm

Hi. Forgot to mention the location, sorry. I am living on treasure island. (UK). Kent.
Thanks
Gary

kleuck · Post by **kleuck** » Tue 01/19/10 6:20 pm

These ?

sirgary · Post by **sirgary** » Wed 01/20/10 5:54 am

Hi the ones in my other marshalls are two springs with a ring on top,
Gary

sub · Post by **sub** » Wed 01/20/10 12:36 pm

Maybe these are similar.
Click on the pic where you can see the EL84 clips.
http://www.ceriatone.com/productSubPage ... teHead.htm

Post by **zaphod_phil** » Wed 01/20/10 1:15 pm

Both kinds do the same job and work equally well IMO....

sirgary · Post by **sirgary** » Wed 01/20/10 3:37 pm

Yes thats the springs. I ordered some from e bay. I dont think the small retaining screws will come out of the 1930 so I will try and clip them through the small holes on the base of the valve holders. Gary

kleuck · Post by **kleuck** » Wed 01/20/10 6:46 pm

zaphod_phil wrote:Both kinds do the same job and work equally well IMO....

In little combos, spings can be noisy.

Donations

Links

Welcome

ecl86

ecl86