OT question
Moderators: zaphod_phil, Daviedawg, Graydon, CurtissRobin, colossal
- redmax61
- Occasional poster
- Posts: 106
- Joined: Sat 02/24/07 2:00 am
- Location: Hampton Roads
OT question
I have a Dagnall 2505 that was taken out of a JTM45. I'm trying to find specs on it to see if I can use it in a 36w configuration using 4 EL84's. I've been finding similar transformers that say they can be used in both configurations, but no concrete specs on the Dagnall.
Is anyone familiar with this transformer?
Is anyone familiar with this transformer?
0 x
Master of my own density.
Robin F.
Robin F.
-
- Frequent poster
- Posts: 893
- Joined: Sat 07/19/03 2:00 am
- Location: UK
- Contact:
Yes,
I have a Dagnall D2505 (Marshall JTM45 spares issue) in a stripper JTM45, which I may use in a 36W (4 X EL84) or a 2 X 6L6.
They are close enough to 4K to do the job.
Do you need the colour code for the leads ?
Steve UK
www.valvepower.co.uk
I have a Dagnall D2505 (Marshall JTM45 spares issue) in a stripper JTM45, which I may use in a 36W (4 X EL84) or a 2 X 6L6.
They are close enough to 4K to do the job.
Do you need the colour code for the leads ?
Steve UK
www.valvepower.co.uk
0 x
- zaphod_phil
- Builder, Admin
- Posts: 15208
- Joined: Wed 03/19/03 2:00 am
- Location: YYZ
-
- Frequent poster
- Posts: 893
- Joined: Sat 07/19/03 2:00 am
- Location: UK
- Contact:
Amplifier Primary Impedance
Marshall, 50W 2xEL34 3,400 Ohms
Marshall 100W 4xEL34 1,750 Ohms
Marshall 18W 2xEL84 8,000 Ohms
Marshall 36W 4xEL84 4,000 Ohms
Marshall JTM45 2xKT66 8,000 Ohms
Vox 30W 4xEL84 4,000 Ohms
Vox 15W 2xEL84 8,000 Ohms
Fender 50W 2x6L6 4,100 Ohms
Fender 100W 4x6L6 2,000 Ohms
Tweed-Spec Cathode Bias 6L6 p-p 6,600 Ohms
Matchless 15W 2xEL84 4,000 Ohm
Matchless 30W 4xEL84 4,000 Ohms
Park 50W 2xEL34 5,000 Ohms
__________________
Originally Posted by Jon Silberman
Steve UK
Marshall, 50W 2xEL34 3,400 Ohms
Marshall 100W 4xEL34 1,750 Ohms
Marshall 18W 2xEL84 8,000 Ohms
Marshall 36W 4xEL84 4,000 Ohms
Marshall JTM45 2xKT66 8,000 Ohms
Vox 30W 4xEL84 4,000 Ohms
Vox 15W 2xEL84 8,000 Ohms
Fender 50W 2x6L6 4,100 Ohms
Fender 100W 4x6L6 2,000 Ohms
Tweed-Spec Cathode Bias 6L6 p-p 6,600 Ohms
Matchless 15W 2xEL84 4,000 Ohm
Matchless 30W 4xEL84 4,000 Ohms
Park 50W 2xEL34 5,000 Ohms
__________________
Originally Posted by Jon Silberman
Steve UK
0 x