12mm or 18mm birch ply for a combo
Moderators: zaphod_phil, Daviedawg, Graydon, CurtissRobin, colossal
- lespaulblues
- Newbie
- Posts: 45
- Joined: Thu 11/13/08 2:00 am
- Location: Unknown
12mm or 18mm birch ply for a combo
I'm just building my first combo box but don't know if i should use 12 or 18mm birch ply.
Any advice would be usefull.
Thanks.
Any advice would be usefull.
Thanks.
0 x
-
- Frequent poster
- Posts: 705
- Joined: Fri 01/25/08 2:00 am
- Location: Highlands and Islands Apparently
- Contact:
if you are going for replica then 12mm , allot of amps are 18mm too though.
whats really important is that you get good material. dont use your local builders wharehouse off the shelf stuff.
check out these plans I drew a few years ago for insperation. I have had over 1100 downloads an no complaints yet.
http://www.mediafire.com/file/qq4hhyhna ... 0PLANS.pdf
whats really important is that you get good material. dont use your local builders wharehouse off the shelf stuff.
check out these plans I drew a few years ago for insperation. I have had over 1100 downloads an no complaints yet.
http://www.mediafire.com/file/qq4hhyhna ... 0PLANS.pdf
0 x