HELP!! Broken NFB switch
Moderators: zaphod_phil, Daviedawg, Graydon, CurtissRobin, colossal
- blaren
- Occasional poster
- Posts: 362
- Joined: Fri 11/11/05 2:00 am
- Location: Whitecourt, Alberta Canada
- Contact:
HELP!! Broken NFB switch
Hey all,
My negative feedback switch got smashed-in on my ~2006 Ceriatone 36RP (with half power switch).
I just went to replace it but I don't have a switch that's rated as high as the original. The original is 10A 125V AC 6A 250V AC
The switch I have is 3A 125V AC 1.5A 250V AC.
Anyone know if this lower rating switch will be ok?
I have to fix this before Saturday. Our RS has no switches. I always leave the NFB "off" anyway so have no problem bypassing the switch but I don't know how.
Thanks in advance for any help anyone can provide.
My negative feedback switch got smashed-in on my ~2006 Ceriatone 36RP (with half power switch).
I just went to replace it but I don't have a switch that's rated as high as the original. The original is 10A 125V AC 6A 250V AC
The switch I have is 3A 125V AC 1.5A 250V AC.
Anyone know if this lower rating switch will be ok?
I have to fix this before Saturday. Our RS has no switches. I always leave the NFB "off" anyway so have no problem bypassing the switch but I don't know how.
Thanks in advance for any help anyone can provide.
0 x
-
- Frequent poster
- Posts: 914
- Joined: Mon 12/10/07 2:00 am
- Location: Melb, Aust
- Contact:
- blaren
- Occasional poster
- Posts: 362
- Joined: Fri 11/11/05 2:00 am
- Location: Whitecourt, Alberta Canada
- Contact: