Recommendations for a single ten inch speaker for 18 watt
Moderators: zaphod_phil, Daviedawg, Graydon, CurtissRobin, colossal
-
- Occasional poster
- Posts: 356
- Joined: Sun 03/30/03 2:00 am
- Location: USA
Recommendations for a single ten inch speaker for 18 watt
This amp is a trem lite amp 18 watter and is housed in a small cabinet that won't accomodate a 12 inch speaker. So I'm looking for speaker recommendations for ten inch speakers that would compliment this amp.
I suppose a Celestion G10 is a good candidate.
Thanks,
Mike
I suppose a Celestion G10 is a good candidate.
Thanks,
Mike
0 x
- JMPGuitars
- Super Duper Admin
- Posts: 3989
- Joined: Tue 09/18/12 8:00 pm
- Location: South Central, MA
- Contact:
Re: Recommendations for a single ten inch speaker for 18 wat
That might be good. You could also consider the Eminence Lil Buddy, or the Tone Tubby Humbolt Alnico.
0 x
'I installed a skylight in my apartment yesterday... The people who live above me are furious.' - Steven Wright
Modern Ground Schemes
Soldering Technique
B+ Voltage Reduction
Amplifier Tools & Parts Info
Web Design: DolceVittoria.com
Guitars / Amps / Effects: JMPGuitars.com
(anti)Social: Facebook · Instagram
Items for Sale
Modern Ground Schemes
Soldering Technique
B+ Voltage Reduction
Amplifier Tools & Parts Info
Web Design: DolceVittoria.com
Guitars / Amps / Effects: JMPGuitars.com
(anti)Social: Facebook · Instagram
Items for Sale
-
- Newbie
- Posts: 51
- Joined: Thu 03/23/17 6:55 am
Re: Recommendations for a single ten inch speaker for 18 watt
What about an Eminence RF10C?
I have one in a 5 watt Bassman Micro I built. Great sounding speaker, plenty power handling for an 18 watter, and quite efficient too.
I have one in a 5 watt Bassman Micro I built. Great sounding speaker, plenty power handling for an 18 watter, and quite efficient too.
0 x
-
- Senior Amp Tech
- Posts: 1169
- Joined: Sat 08/09/08 2:00 am
- Location: Columbia River Gorge, Oregon Side
Re: Recommendations for a single ten inch speaker for 18 watt
+1 on the Tone Tubby. A good match for 18 watt.
0 x
-
- Occasional poster
- Posts: 356
- Joined: Sun 03/30/03 2:00 am
- Location: USA
Re: Recommendations for a single ten inch speaker for 18 watt
The Humboldt is only rated for 25 watts. Maybe the alnico red instead?
0 x
- JMPGuitars
- Super Duper Admin
- Posts: 3989
- Joined: Tue 09/18/12 8:00 pm
- Location: South Central, MA
- Contact:
Re: Recommendations for a single ten inch speaker for 18 watt
The amp is 18 watts, so 25 watts is plenty. If the speaker is rated too high, you eliminate the speaker from your overdrive flavor. Tubes + speaker + circuit all affect the overdrive. If the speaker is rated too high, then the amplifier can't drive it hard enough to contribute to the overdrive tone, and you're left with tubes + circuit only.kinmike wrote:The Humboldt is only rated for 25 watts. Maybe the alnico red instead?
0 x
'I installed a skylight in my apartment yesterday... The people who live above me are furious.' - Steven Wright
Modern Ground Schemes
Soldering Technique
B+ Voltage Reduction
Amplifier Tools & Parts Info
Web Design: DolceVittoria.com
Guitars / Amps / Effects: JMPGuitars.com
(anti)Social: Facebook · Instagram
Items for Sale
Modern Ground Schemes
Soldering Technique
B+ Voltage Reduction
Amplifier Tools & Parts Info
Web Design: DolceVittoria.com
Guitars / Amps / Effects: JMPGuitars.com
(anti)Social: Facebook · Instagram
Items for Sale
-
- Unrated
- Posts: 3
- Joined: Sun 08/13/17 7:59 am
Re: Recommendations for a single ten inch speaker for 18 watt
In my Watkins Scout (2x EL84s) I fitted a 10" Celestion Gold and it sounds magnificent. Not cheap but definitely worth it.
0 x
-
- Newbie
- Posts: 91
- Joined: Wed 02/20/13 5:53 am
Re: Recommendations for a single ten inch speaker for 18 watt
I would look into Warehaouse Guitar Speakers!
They have a great selection of Speakers and are very versatile. You may choose between "british voicing" or "american voicing.
I have chosen many Speakers already for various Amps and Cabinets and have always had the best results.
https://wgsusa.com
They have a great selection of Speakers and are very versatile. You may choose between "british voicing" or "american voicing.
I have chosen many Speakers already for various Amps and Cabinets and have always had the best results.
https://wgsusa.com
0 x
- crgfrench
- Frequent poster
- Posts: 827
- Joined: Fri 04/27/18 3:02 am
Re: Recommendations for a single ten inch speaker for 18 watt
For my current Fullerwell build I was debating between the Celestion G10M greenback ($99) and the Celestion Ten 30 ($35), they both fit well inside the Fender tweed briefcase I'm using for a cabinet. Decided on the latter, will follow up with a sound clip once I finish the build.
You do not have the required permissions to view the files attached to this post.
0 x
-
- Verbose poster
- Posts: 1118
- Joined: Mon 01/04/16 3:52 pm
Re: Recommendations for a single ten inch speaker for 18 watt
innovation! just put my mind at rest and tell me you are going to remove that fake fur on the inside where hot tubes & components are!
1 x
- crgfrench
- Frequent poster
- Posts: 827
- Joined: Fri 04/27/18 3:02 am
Re: Recommendations for a single ten inch speaker for 18 watt
I'm going to give it a try with the fur, what the hell... my current thoughts for minimizing heat are:geoff 1965 wrote: ↑Sun 05/05/19 9:10 aminnovation! just put my mind at rest and tell me you are going to remove that fake fur on the inside where hot tubes & components are!
1) position tubes in center and possibly add some strips of aluminum shielding tape to reflect their heat
2) use an Antek toroid for the PT which I understand run quite a bit cooler than EI wound transformers
3) use 1N5408s instead of an EZ81
4) possibly add some Marshall style diamond-pressed vents and maybe even a small dc computer fan
But I'm loathe to remove the fur, it has that genuine Fullerton mojo we all crave.
Plus I do have several excellent fire extinguishers handy for "risk management".
Last edited by crgfrench on Thu 05/30/19 3:19 pm, edited 1 time in total.
0 x
-
- Newbie
- Posts: 37
- Joined: Thu 05/30/19 7:34 am
Re: Recommendations for a single ten inch speaker for 18 watt
I should remind you that you will get more B+ by doing that - perhaps too much for the tubes. Be careful, or you might need those extinguishers!3) use 1N5408s instead of an EZ81
2 x
- crgfrench
- Frequent poster
- Posts: 827
- Joined: Fri 04/27/18 3:02 am
Re: Recommendations for a single ten inch speaker for 18 watt
That's accurate, thank you! that's why I decided to use the Antek AS-1T275 PT which is 275-0-275.
0 x
-
- Verbose poster
- Posts: 1118
- Joined: Mon 01/04/16 3:52 pm
Re: Recommendations for a single ten inch speaker for 18 watt
Craig,
i've got 275 HT and RL207 2amp diodes and when i initially built the lite2b this gave me a B+ of just over 360VDC and around 350V on the el84 plates.the headroom & tone was superb,however i then fitted a 100ohm sag resistor which not only simulates tube sag it boosts the "touch sensitivity" as well and drops the B+ around 10 volt's.you might want to consider this.
bye the way,i've just noticed my amp is on your list of "18W" questionables! "go and stand in a corner for 30 minutes laddie"!!
i've got 275 HT and RL207 2amp diodes and when i initially built the lite2b this gave me a B+ of just over 360VDC and around 350V on the el84 plates.the headroom & tone was superb,however i then fitted a 100ohm sag resistor which not only simulates tube sag it boosts the "touch sensitivity" as well and drops the B+ around 10 volt's.you might want to consider this.
bye the way,i've just noticed my amp is on your list of "18W" questionables! "go and stand in a corner for 30 minutes laddie"!!
1 x
- crgfrench
- Frequent poster
- Posts: 827
- Joined: Fri 04/27/18 3:02 am
Re: Recommendations for a single ten inch speaker for 18 watt
Which one is yours?geoff 1965 wrote: ↑Thu 05/30/19 10:29 ambye the way,i've just noticed my amp is on your list of "18W" questionables!
0 x
-
- Verbose poster
- Posts: 1118
- Joined: Mon 01/04/16 3:52 pm
Re: Recommendations for a single ten inch speaker for 18 watt
it's the lite2 parallel/drive "18 watt"! which i'm still working on taming/tuning that cascaded beast i've unleashed! i could have built 5 amps in the time i've spent on that mod! my PT has 275V and 190V taps so i can switch to half power "9 watts" for some early breakup but don't tell Dd!
1 x
- crgfrench
- Frequent poster
- Posts: 827
- Joined: Fri 04/27/18 3:02 am
Re: Recommendations for a single ten inch speaker for 18 watt
By the way, I personally don't feel any of the builds on that list are questionable. To me they are all valid 18W variants.
I guess if an amp has a similar topology and puts out in the neighborhood of 15-20W that would be enough for my admittedly low threshold of inclusion. Maybe unless it was all transistor or something foul like that...
I guess if an amp has a similar topology and puts out in the neighborhood of 15-20W that would be enough for my admittedly low threshold of inclusion. Maybe unless it was all transistor or something foul like that...
1 x
-
- Verbose poster
- Posts: 1118
- Joined: Mon 01/04/16 3:52 pm
Re: Recommendations for a single ten inch speaker for 18 watt
yeah i know,just having some fun! i understand what Dd means though,you have to keep within certain parameters or the forum will turn into another PPWatt.com. i like your innovative thinking and input,and that's the beauty of this forum,you get people of all skill & knowledge levels and it's a great place to learn and exchange idea's.
personally i have no background in electronics and no interest to be honest "but" i'm obsessed with valve guitar amps!
personally i have no background in electronics and no interest to be honest "but" i'm obsessed with valve guitar amps!
1 x
-
- Occasional poster
- Posts: 356
- Joined: Sun 03/30/03 2:00 am
- Location: USA
Re: Recommendations for a single ten inch speaker for 18 watt
By the way, I'm the OP and I went with a Celestion Greenback Ten. Sounds good but due to all the amps I have, I don't think it's broken in yet. Will it change much?
Thanks, Mike
Thanks, Mike
1 x
-
- Superior Amp Tech
- Posts: 753
- Joined: Fri 01/08/10 2:00 am
- Location: Scotland
Re: Recommendations for a single ten inch speaker for 18 watt
I fitted a 16 ohm version of that in a clone of a JTM1 combo I built for a friend. It really suits that amp which is much gainier (is that a word?) and grittier than the 18 watt. It took only a short time to mature and sounds great. It sounded more open as you would expect after a wee while of hard playing. Like my 10" Vintage 30s your speaker will need pushing to get there.
Dd
Dd
1 x