EL34s with early break up

Tube-specific discussions

Moderators: CurtissRobin, colossal, zaphod_phil

Post Reply
User avatar
ZeroPointEnergy
Newbie
Newbie
Posts: 46
Joined: Tue 04/28/20 11:08 am

EL34s with early break up

Post by ZeroPointEnergy »

Seeking early break up for EL34, with good singing overtone properties. This is for my JCM 800, vertical inputs all tube signal path. I just recently bought a pair of mullard EL34s and the amp works, but it sounds kinda weak. Not as lively as before

Probably needs biasing, but I have not learned that trick yet. I will have a socket probe on order by next month so I will be able to check the tube voltages in a relatively safe way. So I will bias the amp next month.

Any suggestions for EL34s that are nice and musical, but mainly break up early into saturation overdrive? Thanks!
0 x

User avatar
zaphod_phil
Builder, Admin
Builder, Admin
Posts: 15208
Joined: Wed 03/19/03 2:00 am
Location: YYZ

Re: EL34s with early break up

Post by zaphod_phil »

EL34s are very standard and don't have much gain. Generally Mullard/Philips are considered to be the best, but don't expect any particular brand to give you early break up into "saturation overdrive". Likewise, it's unlikely that rebiasing will give you that. Just continue with your variac experiments.
1 x
Nature abhors a clean tube amp

User avatar
Bieworm
Verbose Moderator
Verbose Moderator
Posts: 2287
Joined: Mon 02/10/20 8:24 am
Location: Belgium

Re: EL34s with early break up

Post by Bieworm »

6V6 ? JJ's can handle up to 500V on the plates. They'll break up allright
0 x
"THIS should be played at high volume..preferably in a residential area"

User avatar
zaphod_phil
Builder, Admin
Builder, Admin
Posts: 15208
Joined: Wed 03/19/03 2:00 am
Location: YYZ

Re: EL34s with early break up

Post by zaphod_phil »

Good suggestion
1 x
Nature abhors a clean tube amp

Post Reply