3-input LTP PI
Moderators: JMPGuitars, zaphod_phil, Daviedawg, Graydon, CurtissRobin, colossal
-
- Newbie
- Posts: 55
- Joined: Tue 06/02/20 2:41 pm
3-input LTP PI
Hi all
Thinking about my next build, was wondering if a 2-channel Reverb Deluxe through a 3-input LTP is achievable? One channel would be the reverb side of Deluxe, other would be a 5f6-a preamp.
Aiken says you can have 2 inputs to LTP + negative feedback. However I'm not clear on practicalities of phase described here
https://www.aikenamps.com/index.php/the-long-tail-pair
Alternatively could mix channels with 220k resistors like in original Deluxe Reverb? Would that change the tone of 5f6-a side?
Pointers really appreciated! thanks
Thinking about my next build, was wondering if a 2-channel Reverb Deluxe through a 3-input LTP is achievable? One channel would be the reverb side of Deluxe, other would be a 5f6-a preamp.
Aiken says you can have 2 inputs to LTP + negative feedback. However I'm not clear on practicalities of phase described here
https://www.aikenamps.com/index.php/the-long-tail-pair
Alternatively could mix channels with 220k resistors like in original Deluxe Reverb? Would that change the tone of 5f6-a side?
Pointers really appreciated! thanks
0 x
- crgfrench
- Frequent poster
- Posts: 827
- Joined: Fri 04/27/18 3:02 am
Re: 3-input LTP PI
I have a 2-input LTP with NFB in my current 36 watt build. The channels don't mix until they get to the PI. Sounds awesome with & without NFB engaged.
0 x
-
- Verbose poster
- Posts: 1118
- Joined: Mon 01/04/16 3:52 pm
Re: 3-input LTP PI
not sure about the deluxe/5f6 but my 6V6 project preamp is based on the trinity mk2 plexi 18W except the normal channel is lite2 based parallel and the TMB channel.i have both channels going into the same side of the standard 18W LTP with no problems.i've also cascaded the lite2 into the TMB channel so basically it's like 3 channels.
i find the aitken "phasing" a bit unclear as well!
i find the aitken "phasing" a bit unclear as well!
0 x
- crgfrench
- Frequent poster
- Posts: 827
- Joined: Fri 04/27/18 3:02 am
Re: 3-input LTP PI
If you look at my schematic you'll see it is just like what Aiken calls "3 input PI". Its great.
download/file.php?id=12536&mode=view
download/file.php?id=12536&mode=view
1 x
-
- Newbie
- Posts: 55
- Joined: Tue 06/02/20 2:41 pm
Re: 3-input LTP PI
Oh wow, thanks Craig!
so that does work like a charm? No issues whatsoever??
Would that change drastically the tone of either channel vs. having 2 amps? That would be a VERY cool build!
Geoff, would you have a schematic for your build please? looks like the same as Craig's though
so that does work like a charm? No issues whatsoever??
Would that change drastically the tone of either channel vs. having 2 amps? That would be a VERY cool build!
Geoff, would you have a schematic for your build please? looks like the same as Craig's though
1 x
-
- Verbose poster
- Posts: 1118
- Joined: Mon 01/04/16 3:52 pm
Re: 3-input LTP PI
i think Craig's look's more suitable for your purpose though
You do not have the required permissions to view the files attached to this post.
0 x
- crgfrench
- Frequent poster
- Posts: 827
- Joined: Fri 04/27/18 3:02 am
Re: 3-input LTP PI
Like a Lucky Charm! No issues at all. Quietest amp I've ever owned -- no hum, no hiss, no buzz, just dead quiet until you strike a note. And then: like honey dripping off a hot buttered biscuit.
Now -- that said I have tested both channels independently, but I have not yet jumpered the channels across the input jacks to blend them -- that might induce some noise, I don't know yet; hopefully I will try that tonight. Also, I'm just wiring in the FX loop today so that could introduce something. But, so far it's a phenomenal circuit in both channels, with NFB on or off, and also at full or half power. The NFB really cleans it up, I was surprised how much headroom it opens up.
0 x
- crgfrench
- Frequent poster
- Posts: 827
- Joined: Fri 04/27/18 3:02 am
Re: 3-input LTP PI
I love that Trinity Plexi design, I'd like to build that soon.geoff 1965 wrote: ↑Tue 08/11/20 11:18 am18WattPlexiMkIISchematic5 (1).pdf
here's the schematic Tommy,...
0 x
-
- Verbose poster
- Posts: 1118
- Joined: Mon 01/04/16 3:52 pm
Re: 3-input LTP PI
still at experimental stage Craig and the TMB channel is new to me but there is a mass of tone & overdrive with the cascade mod!
just in the middle of sorting a stupid error! i picked up a 290-0-290 220ma PT thinking if i decide in future to build a 36W or use a GZ34 rectifier i'll have a suitable PT and like an idiot i wired it into my little cage 18W which has EZ81 and noval tube sockets! so i'm putting the 220ma into the 6V6 with the octal sockets and if i end up not liking the 6V6's i've got the option of EL34's.
i'll post my progress on a seperate post when back on track
just in the middle of sorting a stupid error! i picked up a 290-0-290 220ma PT thinking if i decide in future to build a 36W or use a GZ34 rectifier i'll have a suitable PT and like an idiot i wired it into my little cage 18W which has EZ81 and noval tube sockets! so i'm putting the 220ma into the 6V6 with the octal sockets and if i end up not liking the 6V6's i've got the option of EL34's.
i'll post my progress on a seperate post when back on track
1 x
-
- Newbie
- Posts: 55
- Joined: Tue 06/02/20 2:41 pm
Re: 3-input LTP PI
Great stuff - thanks
Why don't I try this way, see how it sounds. I can always switch to 220k mixing resistors, easy change
Why don't I try this way, see how it sounds. I can always switch to 220k mixing resistors, easy change
1 x
-
- Verbose poster
- Posts: 1118
- Joined: Mon 01/04/16 3:52 pm
Re: 3-input LTP PI
download/file.php?id=10428
here's where i got the idea of both channels thru one side Tommy
here's where i got the idea of both channels thru one side Tommy
0 x
-
- Newbie
- Posts: 55
- Joined: Tue 06/02/20 2:41 pm
Re: 3-input LTP PI
Thanks Geoff
Out of curiosity, how did you calculate the value of the caps before the 220k resistors?
That’s something I still need to figure out for my build
Out of curiosity, how did you calculate the value of the caps before the 220k resistors?
That’s something I still need to figure out for my build
0 x
-
- Verbose poster
- Posts: 1118
- Joined: Mon 01/04/16 3:52 pm
Re: 3-input LTP PI
i don't have the 220K's,can you add a schematic showing what you are thinking of?
0 x
-
- Newbie
- Posts: 55
- Joined: Tue 06/02/20 2:41 pm
Re: 3-input LTP PI
This one for example
http://ampwares.com/schematics/twin_reverb_ab763.pdf
You can see 2x 220k resistors feeding one input of the LTP
Craig, on the 3 input LTP, was wondering if there is a difference in tone depending on which input you connect? (leaving the feedback loop where it is)
http://ampwares.com/schematics/twin_reverb_ab763.pdf
You can see 2x 220k resistors feeding one input of the LTP
Craig, on the 3 input LTP, was wondering if there is a difference in tone depending on which input you connect? (leaving the feedback loop where it is)
0 x
- crgfrench
- Frequent poster
- Posts: 827
- Joined: Fri 04/27/18 3:02 am
Re: 3-input LTP PI
Within a channel, if you plug into the high gain jack it's a bit louder than plugging into the low gain jack but the tone is the same. Switching to the other channel input changes the tone considerably, since the channels are voiced differently.
0 x
-
- Verbose poster
- Posts: 1118
- Joined: Mon 01/04/16 3:52 pm
Re: 3-input LTP PI
yeah that's the difference with the couplers of the normal "lite" & TMB channels on my amp,the TMB has a 22n into the phase inverter and is a bit darker than the normal channel with 10n.
another thing i do on the 18W is replace the 4n7 feeding off the plate with a 10n which lets more breakup through "read the notes on ZP's parallel/cascade mod" but the you have to adjust the values in the tonestack to suit the extra bass coming thru.
another thing i do on the 18W is replace the 4n7 feeding off the plate with a 10n which lets more breakup through "read the notes on ZP's parallel/cascade mod" but the you have to adjust the values in the tonestack to suit the extra bass coming thru.
2 x
-
- Newbie
- Posts: 55
- Joined: Tue 06/02/20 2:41 pm
Re: 3-input LTP PI
Craig, looking at your schematic in more details as I'm drawing mine:crgfrench wrote: ↑Tue 08/11/20 10:41 amIf you look at my schematic you'll see it is just like what Aiken calls "3 input PI". Its great.
download/file.php?id=12536&mode=view
Essentially your feedback loop is wired to the input which has the phase complications. You are sending feedback to both power tubes with the same phase, while the preamp signal is out of phase in each power tube. I'm not sure how that affects NFB.
It would be interesting to disconnect one of the channels and put the feedback in the current TMB channel input to see how that affects the sound...
Having read a bit more I'm erring on the side of using mixing resistors - will be closer to the original tone of the Reverb Deluxe which has these. I'm not sure what it does to the Bassman preamp tone but I won't get the true Bassman tone anyway. Feels like it will be easier to implement the Bassman-style presence pot too
0 x
-
- Newbie
- Posts: 55
- Joined: Tue 06/02/20 2:41 pm
Re: 3-input LTP PI
Other idea for mixing signals, which I'm not sure I've seen before in a guitar amp build!
If I threw in one more tube to the build I suppose I could do that + have the trem after all. 1 stone..
Any thoughts?
If I threw in one more tube to the build I suppose I could do that + have the trem after all. 1 stone..
Any thoughts?
You do not have the required permissions to view the files attached to this post.
0 x
-
- Newbie
- Posts: 55
- Joined: Tue 06/02/20 2:41 pm
Re: 3-input LTP PI
Actually..
https://www.ampbooks.com/mobile/classic ... et-atkins/
Not sure if the same as a Tweed mixer
https://archive.ampage.org/threads/4/ga ... er_-2.html
https://www.ampbooks.com/mobile/classic ... et-atkins/
Not sure if the same as a Tweed mixer
https://archive.ampage.org/threads/4/ga ... er_-2.html
0 x
- crgfrench
- Frequent poster
- Posts: 827
- Joined: Fri 04/27/18 3:02 am
Re: 3-input LTP PI
The Aiken discussion has an error. His input points 2 (lower end of C2) and 3 (lower end of R6) are the same point in the circuit. So it's a 2 input setup after all.
0 x