isolation transformer
Moderators: zaphod_phil, Daviedawg, Graydon, CurtissRobin, colossal
-
- Verbose poster
- Posts: 1118
- Joined: Mon 01/04/16 3:52 pm
isolation transformer
need some help here guys!
i'm building an AC power supply with switchable "earthed/floating" output for working with an oscilloscope.i've sourced some isolation transformers but am unsure of the current rating of the windings i will need for working on guitar amps.what current amperage would you think will be safe? i don't want to buy "overkill" but also don't want to be under spec.
thanks
i'm building an AC power supply with switchable "earthed/floating" output for working with an oscilloscope.i've sourced some isolation transformers but am unsure of the current rating of the windings i will need for working on guitar amps.what current amperage would you think will be safe? i don't want to buy "overkill" but also don't want to be under spec.
thanks
0 x
- JMPGuitars
- Super Duper Admin
- Posts: 3969
- Joined: Tue 09/18/12 8:00 pm
- Location: South Central, MA
- Contact:
Re: isolation transformer
#1 - the scope needs to be grounded at all times.
#2 - watch this video: https://www.youtube.com/watch?v=xaELqAo4kkQ
#3 - if your intention is to use the ground probe on anything besides ground, get a differential probe instead.
I hope you're not doing this because of Uncle Doug. What he does in his video re: isolation is beyond dangerous / stupid.
#2 - watch this video: https://www.youtube.com/watch?v=xaELqAo4kkQ
#3 - if your intention is to use the ground probe on anything besides ground, get a differential probe instead.
I hope you're not doing this because of Uncle Doug. What he does in his video re: isolation is beyond dangerous / stupid.
0 x
'I installed a skylight in my apartment yesterday... The people who live above me are furious.' - Steven Wright
Modern Ground Schemes
Soldering Technique
B+ Voltage Reduction
Amplifier Tools & Parts Info
Web Design: DolceVittoria.com
Guitars / Amps / Effects: JMPGuitars.com
(anti)Social: Facebook · Instagram
Items for Sale
Modern Ground Schemes
Soldering Technique
B+ Voltage Reduction
Amplifier Tools & Parts Info
Web Design: DolceVittoria.com
Guitars / Amps / Effects: JMPGuitars.com
(anti)Social: Facebook · Instagram
Items for Sale
- TriodeLuvr
- Frequent poster
- Posts: 616
- Joined: Tue 10/16/18 11:19 am
Re: isolation transformer
That's a death machine. The only safe way to do this is with an isolated input adapter or a battery powered scope.
1 x
-
- Verbose poster
- Posts: 1118
- Joined: Mon 01/04/16 3:52 pm
Re: isolation transformer
thanks Josh, i've seen that and several other tutorials.i'm confident with the procedures and know the scope needs to be grounded,the "floating" is for the device under test.i've seen a nicely priced transformer which is 240V to 240V "one to one" ratio and the current rating is 1.7amp and 250VA,this is what i'm unsure of.
0 x
- JMPGuitars
- Super Duper Admin
- Posts: 3969
- Joined: Tue 09/18/12 8:00 pm
- Location: South Central, MA
- Contact:
Re: isolation transformer
geoff 1965 wrote: ↑Tue 01/12/21 7:09 pmthanks Josh, i've seen that and several other tutorials.i'm confident with the procedures and know the scope needs to be grounded,the "floating" is for the device under test.i've seen a nicely priced transformer which is 240V to 240V "one to one" ratio and the current rating is 1.7amp and 250VA,this is what i'm unsure of.
Why not just get a differential probe? I paid under $150 for mine.
0 x
'I installed a skylight in my apartment yesterday... The people who live above me are furious.' - Steven Wright
Modern Ground Schemes
Soldering Technique
B+ Voltage Reduction
Amplifier Tools & Parts Info
Web Design: DolceVittoria.com
Guitars / Amps / Effects: JMPGuitars.com
(anti)Social: Facebook · Instagram
Items for Sale
Modern Ground Schemes
Soldering Technique
B+ Voltage Reduction
Amplifier Tools & Parts Info
Web Design: DolceVittoria.com
Guitars / Amps / Effects: JMPGuitars.com
(anti)Social: Facebook · Instagram
Items for Sale
-
- Verbose poster
- Posts: 1118
- Joined: Mon 01/04/16 3:52 pm
Re: isolation transformer
i'll look into that Josh, the floating is just an option and i would still use my current limiter and be very careful,been electrocuted twice in my life and that's enough!
can you go into more detail with the "isolated input adapter" Jack?
can you go into more detail with the "isolated input adapter" Jack?
Last edited by geoff 1965 on Tue 01/12/21 7:46 pm, edited 1 time in total.
0 x
- JMPGuitars
- Super Duper Admin
- Posts: 3969
- Joined: Tue 09/18/12 8:00 pm
- Location: South Central, MA
- Contact:
Re: isolation transformer
A differential probe is a better option than an iso transformer. I have one of those too, but I don't really use it. If I need to do that (which I really almost never do), the differential probe is what I would grab. The one I have is a Micsig DP10013. If I was gonna spend more than that (which I'm not), I would probably look at ProbeMaster. I have some passive probes coming from them I'm looking forward to trying out.geoff 1965 wrote: ↑Tue 01/12/21 7:34 pmi'll look into that Josh, the floating is just an option and i would still use my current limiter and be very careful,been electrocuted twice in my life and that's enough!
0 x
'I installed a skylight in my apartment yesterday... The people who live above me are furious.' - Steven Wright
Modern Ground Schemes
Soldering Technique
B+ Voltage Reduction
Amplifier Tools & Parts Info
Web Design: DolceVittoria.com
Guitars / Amps / Effects: JMPGuitars.com
(anti)Social: Facebook · Instagram
Items for Sale
Modern Ground Schemes
Soldering Technique
B+ Voltage Reduction
Amplifier Tools & Parts Info
Web Design: DolceVittoria.com
Guitars / Amps / Effects: JMPGuitars.com
(anti)Social: Facebook · Instagram
Items for Sale
-
- Verbose poster
- Posts: 1118
- Joined: Mon 01/04/16 3:52 pm
Re: isolation transformer
As usual you get controversy when watching tutorials on YouTube!
most people recommend isolating the devise under test but i’ve just watched Terry at D-Lab signal trace from the input jack to grids & plates of preamp to primary and secondary output on a fender champ that had a grounded input chord and he ground isolated the scope! it’s hard sometimes determining the correct method when you are new to using a device.
most people recommend isolating the devise under test but i’ve just watched Terry at D-Lab signal trace from the input jack to grids & plates of preamp to primary and secondary output on a fender champ that had a grounded input chord and he ground isolated the scope! it’s hard sometimes determining the correct method when you are new to using a device.
0 x
- JMPGuitars
- Super Duper Admin
- Posts: 3969
- Joined: Tue 09/18/12 8:00 pm
- Location: South Central, MA
- Contact:
Re: isolation transformer
Yikes! He's usually good. BUT to be fair, he uses a lot of cheap old scopes, so if he destroys one, he's probably only out like $20. lolgeoff 1965 wrote: ↑Tue 01/12/21 8:50 pmAs usual you get controversy when watching tutorials on YouTube!
most people recommend isolating the devise under test but i’ve just watched Terry at D-Lab signal trace from the input jack to grids & plates of preamp to primary and secondary output on a fender champ that had a grounded input chord and he ground isolated the scope! it’s hard sometimes determining the correct method when you are new to using a device.
0 x
'I installed a skylight in my apartment yesterday... The people who live above me are furious.' - Steven Wright
Modern Ground Schemes
Soldering Technique
B+ Voltage Reduction
Amplifier Tools & Parts Info
Web Design: DolceVittoria.com
Guitars / Amps / Effects: JMPGuitars.com
(anti)Social: Facebook · Instagram
Items for Sale
Modern Ground Schemes
Soldering Technique
B+ Voltage Reduction
Amplifier Tools & Parts Info
Web Design: DolceVittoria.com
Guitars / Amps / Effects: JMPGuitars.com
(anti)Social: Facebook · Instagram
Items for Sale
-
- Verbose poster
- Posts: 1118
- Joined: Mon 01/04/16 3:52 pm
- TriodeLuvr
- Frequent poster
- Posts: 616
- Joined: Tue 10/16/18 11:19 am
Re: isolation transformer
It's the same as the differential probe Josh mentioned.geoff 1965 wrote: ↑Tue 01/12/21 7:34 pmcan you go into more detail with the "isolated input adapter" Jack?
I just want to add that the problem here isn't the risk of equipment damage. All AC-operated equipment that isn't earth grounded carries a charge on its chassis. The amount of current that can be drawn from the chassis to ground depends on several things. The big factor usually is capacitance between the windings of the power transformer. That's why the patient monitoring equipment in hospitals uses special low-capacitance transformers. The equipment is usually not earth grounded due to the risk of electrocution if a patient touches two things at once.
That's the same concept you're facing when you "unground" your scope. Capacitance within the isolation transformer continues to connect the chassis to the AC line. It's not a direct connection, of course, but it will usually carry sufficient current to stop your heart. And if you happen to touch the scope ground (such as a probe clip lead) and the chassis of a grounded appliance at the same time, you become part of the current path. In fact, touching a supposedly isolated item can also create a shock hazard, depending on the polarity of the signal leaking to the chassis in that particular piece of equipment.
This is why manufacturers abolished the use of so-called death caps across the AC line. It was like installing an especially leaky power transformer in every amplifier!
My apologies if you already know all this, just thought it was worth mentioning.
Jack
2 x
- JMPGuitars
- Super Duper Admin
- Posts: 3969
- Joined: Tue 09/18/12 8:00 pm
- Location: South Central, MA
- Contact:
Re: isolation transformer
Well, yeah, that's about $68. More expensive than half of his scopes.
1 x
'I installed a skylight in my apartment yesterday... The people who live above me are furious.' - Steven Wright
Modern Ground Schemes
Soldering Technique
B+ Voltage Reduction
Amplifier Tools & Parts Info
Web Design: DolceVittoria.com
Guitars / Amps / Effects: JMPGuitars.com
(anti)Social: Facebook · Instagram
Items for Sale
Modern Ground Schemes
Soldering Technique
B+ Voltage Reduction
Amplifier Tools & Parts Info
Web Design: DolceVittoria.com
Guitars / Amps / Effects: JMPGuitars.com
(anti)Social: Facebook · Instagram
Items for Sale
- JMPGuitars
- Super Duper Admin
- Posts: 3969
- Joined: Tue 09/18/12 8:00 pm
- Location: South Central, MA
- Contact:
Re: isolation transformer
Well, sure, killing yourself testing something is worse than exploding a scope. But that £50 scope can be a big deal too.TriodeLuvr wrote: ↑Wed 01/13/21 12:52 amI just want to add that the problem here isn't the risk of equipment damage.
1 x
'I installed a skylight in my apartment yesterday... The people who live above me are furious.' - Steven Wright
Modern Ground Schemes
Soldering Technique
B+ Voltage Reduction
Amplifier Tools & Parts Info
Web Design: DolceVittoria.com
Guitars / Amps / Effects: JMPGuitars.com
(anti)Social: Facebook · Instagram
Items for Sale
Modern Ground Schemes
Soldering Technique
B+ Voltage Reduction
Amplifier Tools & Parts Info
Web Design: DolceVittoria.com
Guitars / Amps / Effects: JMPGuitars.com
(anti)Social: Facebook · Instagram
Items for Sale
-
- Verbose poster
- Posts: 1118
- Joined: Mon 01/04/16 3:52 pm
Re: isolation transformer
My plan was to build a unit with isolation transformer/variac/bulb limiter.but going to look more deeply into this,just seen one with a variable current trip which seems a good idea.
0 x
-
- Verbose poster
- Posts: 1118
- Joined: Mon 01/04/16 3:52 pm
Re: isolation transformer
Just picked this zenith variac up for the project,massive 8amp/2KVA so plenty current draw.not sure about isolation transformer yet but i’m thinking of 2 outputs from the variac,one with a series bulb limiter and one direct with a fuse/trip protection.
You do not have the required permissions to view the files attached to this post.
1 x
- crgfrench
- Frequent poster
- Posts: 827
- Joined: Fri 04/27/18 3:02 am
Re: isolation transformer
In one of the Dlab videos Terry is drinking wine in the beginning and halfway through the video he’s probing the live socket pins with the probe in his right hand and his left fingers resting on the metal chassis.
0 x
-
- Verbose poster
- Posts: 1118
- Joined: Mon 01/04/16 3:52 pm
Re: isolation transformer
The isolation transformer is out of the equation, this 8 amp variac takes up 3/4 of the steel cabinet. fitting a NTC thermistor in series to input to protect from inrush current these big variacs can have,output is simple limiter/direct with voltage/current meter.
You do not have the required permissions to view the files attached to this post.
0 x
- JMPGuitars
- Super Duper Admin
- Posts: 3969
- Joined: Tue 09/18/12 8:00 pm
- Location: South Central, MA
- Contact:
Re: isolation transformer
Why use a 2A fuse on an 8A variac? If you're going to limit it, I would use a second fuse to limit it on the output side, and have an easily accessible fuse holder to swap it out for different amps or DUTs that might need more.
1 x
'I installed a skylight in my apartment yesterday... The people who live above me are furious.' - Steven Wright
Modern Ground Schemes
Soldering Technique
B+ Voltage Reduction
Amplifier Tools & Parts Info
Web Design: DolceVittoria.com
Guitars / Amps / Effects: JMPGuitars.com
(anti)Social: Facebook · Instagram
Items for Sale
Modern Ground Schemes
Soldering Technique
B+ Voltage Reduction
Amplifier Tools & Parts Info
Web Design: DolceVittoria.com
Guitars / Amps / Effects: JMPGuitars.com
(anti)Social: Facebook · Instagram
Items for Sale
-
- Verbose poster
- Posts: 1118
- Joined: Mon 01/04/16 3:52 pm
Re: isolation transformer
Finished housing the variac,ac output is switchable between bulb limited or direct fused “good suggestion Josh” tested with a 500mA fuse,I can get a range of fuses to suit testing now,better than a current trip which is limited to one level.
bridge rectified/filtered the ac post out socket so i’ve around 430 VDC as well.
bridge rectified/filtered the ac post out socket so i’ve around 430 VDC as well.
You do not have the required permissions to view the files attached to this post.
3 x
- JMPGuitars
- Super Duper Admin
- Posts: 3969
- Joined: Tue 09/18/12 8:00 pm
- Location: South Central, MA
- Contact:
Re: isolation transformer
But more importantly, how fast does it go with that racing steering wheel?
3 x
'I installed a skylight in my apartment yesterday... The people who live above me are furious.' - Steven Wright
Modern Ground Schemes
Soldering Technique
B+ Voltage Reduction
Amplifier Tools & Parts Info
Web Design: DolceVittoria.com
Guitars / Amps / Effects: JMPGuitars.com
(anti)Social: Facebook · Instagram
Items for Sale
Modern Ground Schemes
Soldering Technique
B+ Voltage Reduction
Amplifier Tools & Parts Info
Web Design: DolceVittoria.com
Guitars / Amps / Effects: JMPGuitars.com
(anti)Social: Facebook · Instagram
Items for Sale