Values of the screen grid resistors influence sound

18watt-specific Tech Talk - Building, Fixing, Parts, Mods...

Moderators: CurtissRobin, colossal, zaphod_phil, Daviedawg, Graydon

User avatar
JMPGuitars
Super Duper Admin
Super Duper Admin
Posts: 3955
Joined: Tue 09/18/12 8:00 pm
Location: South Central, MA
Contact:

Re: Values of the screen grid resistors influence sound

Post by JMPGuitars »

TriodeLuvr wrote:
Fri 05/14/21 8:37 am
JMPGuitars wrote:
Thu 05/13/21 5:59 pm
Changing the screen resistor is only one way to change the relationship. There are better ways to do it.
That might not be true, Josh. Dropping screen voltage with a simple series resistor allows screen voltage to wiggle around and to drop even further when the tube is overdriven. I'm convinced this contributes to a smoother breakup. Other methods, such as a series Zener or a voltage regulator, or even just bypassing the screens with a capacitor after the resistor, won't produce the same effect. This is one area in which I think you and I are in agreement, i.e. larger screen resistors improve the overdrive sound.

Ironically, my current hi-fi project with 6L6 types will apply 100V less to the screens than the anodes. I'm using a gas VR tube in series from B+ to produce the drop. The screens won't be stiffly regulated at a fixed voltage, but they will be locked to the anodes over variations in B+. NOT a good technique for a guitar amplifier. :lol:

Jack
lol, we do agree on stuff. Hell, I agree with your HiFi stuff too...when we're talking about HiFi. 😉
And when I eventually have enough free time to make a HiFi amp, I'll definitely pick your brain on it.

You and I dig the higher screen resistor sound, but in this case, we have no idea what any of his voltages are. My guess is the screen resistor play is making up for something else.

To be clear, my intent is for him to use a higher screen resistor value, and correct the tone through other means.

Thanks,
Josh
2 x
'I installed a skylight in my apartment yesterday... The people who live above me are furious.' - Steven Wright

Modern Ground Schemes
Soldering Technique
B+ Voltage Reduction
Amplifier Tools & Parts Info


Web Design: DolceVittoria.com
Guitars / Amps / Effects: JMPGuitars.com
(anti)Social: Facebook · Instagram
Items for Sale

musicheals
Newbie
Newbie
Posts: 45
Joined: Thu 05/13/21 12:08 am

Re: Values of the screen grid resistors influence sound

Post by musicheals »

Sorry, I posted the voltages before. Here it is again

308V on the screen grids incl. 100 ohm resistors

314V on anodes

11 V on the kathode

The kathode resistor is 150 ohm with a cap 2200uF

Thanks a lot
0 x

User avatar
JMPGuitars
Super Duper Admin
Super Duper Admin
Posts: 3955
Joined: Tue 09/18/12 8:00 pm
Location: South Central, MA
Contact:

Re: Values of the screen grid resistors influence sound

Post by JMPGuitars »

musicheals wrote:
Fri 05/14/21 11:15 am
Sorry, I posted the voltages before. Here it is again

308V on the screen grids incl. 100 ohm resistors

314V on anodes

11 V on the kathode

The kathode resistor is 150 ohm with a cap 2200uF

Thanks a lot
Ah, I didn't see them, they got buried behind other posts.

What's your B+? What amp circuit is this? What power transformer are you using?
0 x
'I installed a skylight in my apartment yesterday... The people who live above me are furious.' - Steven Wright

Modern Ground Schemes
Soldering Technique
B+ Voltage Reduction
Amplifier Tools & Parts Info


Web Design: DolceVittoria.com
Guitars / Amps / Effects: JMPGuitars.com
(anti)Social: Facebook · Instagram
Items for Sale

musicheals
Newbie
Newbie
Posts: 45
Joined: Thu 05/13/21 12:08 am

Re: Values of the screen grid resistors influence sound

Post by musicheals »

My B+ is 324V
The PT got 250V 110mA. SS bridge rectifier.
I got a kind of trainwreck related preamp. The PI and PA is straight 12 Watt. I use VVR for PA and PI.....

THANKS A LOT
0 x

musicheals
Newbie
Newbie
Posts: 45
Joined: Thu 05/13/21 12:08 am

Re: Values of the screen grid resistors influence sound

Post by musicheals »

Sorry, not 12 watt. 18 watt
0 x

User avatar
JMPGuitars
Super Duper Admin
Super Duper Admin
Posts: 3955
Joined: Tue 09/18/12 8:00 pm
Location: South Central, MA
Contact:

Re: Values of the screen grid resistors influence sound

Post by JMPGuitars »

What's the brand/model of the PT? That B+ is pretty low for EL84s... Do you have a schematic of your build?
0 x
'I installed a skylight in my apartment yesterday... The people who live above me are furious.' - Steven Wright

Modern Ground Schemes
Soldering Technique
B+ Voltage Reduction
Amplifier Tools & Parts Info


Web Design: DolceVittoria.com
Guitars / Amps / Effects: JMPGuitars.com
(anti)Social: Facebook · Instagram
Items for Sale

musicheals
Newbie
Newbie
Posts: 45
Joined: Thu 05/13/21 12:08 am

Re: Values of the screen grid resistors influence sound

Post by musicheals »

PT is a TBT from Germany 250V 110mA, 6,3V 5A
Yes 324V is a bit low, but I didn't want to much because I want to have the option to have classA also. I'm a big fan of vox
0 x

musicheals
Newbie
Newbie
Posts: 45
Joined: Thu 05/13/21 12:08 am

Re: Values of the screen grid resistors influence sound

Post by musicheals »

... here's the schematic

Thanks a lot
You do not have the required permissions to view the files attached to this post.
0 x

User avatar
Bieworm
Verbose Moderator
Verbose Moderator
Posts: 2287
Joined: Mon 02/10/20 8:24 am
Location: Belgium

Re: Values of the screen grid resistors influence sound

Post by Bieworm »

musicheals wrote:
Fri 05/14/21 1:09 pm
My B+ is 324V
The PT got 250V 110mA. SS bridge rectifier.
I got a kind of trainwreck related preamp. The PI and PA is straight 12 Watt. I use VVR for PA and PI.....

THANKS A LOT
In what aspect is your PI and PA straight 18 watt? The NFB loop is contraproductive to the 18W vibe...
0 x
"THIS should be played at high volume..preferably in a residential area"

User avatar
JMPGuitars
Super Duper Admin
Super Duper Admin
Posts: 3955
Joined: Tue 09/18/12 8:00 pm
Location: South Central, MA
Contact:

Re: Values of the screen grid resistors influence sound

Post by JMPGuitars »

That's not the typical 18W circuit, but it looks like typical Marshall. I would try it without the NFB and see if you like it better. It should be more touch sensitive, and less sterile sounding.
0 x
'I installed a skylight in my apartment yesterday... The people who live above me are furious.' - Steven Wright

Modern Ground Schemes
Soldering Technique
B+ Voltage Reduction
Amplifier Tools & Parts Info


Web Design: DolceVittoria.com
Guitars / Amps / Effects: JMPGuitars.com
(anti)Social: Facebook · Instagram
Items for Sale

musicheals
Newbie
Newbie
Posts: 45
Joined: Thu 05/13/21 12:08 am

Re: Values of the screen grid resistors influence sound

Post by musicheals »

Yes, I will give it a try without negative feedback....
My B+ is around 20 volts less than a typical 18 watt Marshall. Does this make a big difference? And if so, what will be the difference asides from a bit more power?

Thanks a lot...
0 x

User avatar
Bieworm
Verbose Moderator
Verbose Moderator
Posts: 2287
Joined: Mon 02/10/20 8:24 am
Location: Belgium

Re: Values of the screen grid resistors influence sound

Post by Bieworm »

musicheals wrote:
Sat 05/15/21 9:40 am
Yes, I will give it a try without negative feedback....
My B+ is around 20 volts less than a typical 18 watt Marshall. Does this make a big difference? And if so, what will be the difference asides from a bit more power?

Thanks a lot...
I don't think these values/voltages are arbitrary. It's more important the proportions are matching. My first Tremolo TMB has a B+ 15V over spec. I think it sounds awesome. Think about it... there is nobody on this planet that can tell the difference between 15 watt or 18 watt by ear. They're both equally loud watts.
About the NFB loop... with the loop the transition from clean to mean is very abrupt. Without the loop it's more gradual. You reach the max clean volume at 3 or 4 on the dial.. then it starts to break up more and more.. without getting much louder. It's the key ingrediënt of an 18 watt.

And for loudness.. don't underestimate the roll of the speaker.. and don't forget to give a well broken in V30 a chance!!! I'm glad I did eventually.
0 x
"THIS should be played at high volume..preferably in a residential area"

musicheals
Newbie
Newbie
Posts: 45
Joined: Thu 05/13/21 12:08 am

Re: Values of the screen grid resistors influence sound

Post by musicheals »

Thanks a lot. I use a 2/12 with V30s and a 1/12 with a G12H and I like both very much. I absolutely agree in things power. I never needed more than 18 watts, even on open air stages...
You wrote about the right proportions in voltages. Could you please give me more detail or maybe and example for my B+ 324 volts?

Thanks a lot
0 x

User avatar
Bieworm
Verbose Moderator
Verbose Moderator
Posts: 2287
Joined: Mon 02/10/20 8:24 am
Location: Belgium

Re: Values of the screen grid resistors influence sound

Post by Bieworm »

I would copy the LTP PI and power amp of a standard 18W and bias the power tubes correctly. See how that sounds...
I have built an amp with the 2nd gain stage that's pretty much like yours, with the cold clipper and all... but did the tone stack after the 2nd stage. I really like that amp. I put a 1M gain pot between the 1st and 2nd stage + a single tone knob as tone stack-y thing.
0 x
"THIS should be played at high volume..preferably in a residential area"

User avatar
JMPGuitars
Super Duper Admin
Super Duper Admin
Posts: 3955
Joined: Tue 09/18/12 8:00 pm
Location: South Central, MA
Contact:

Re: Values of the screen grid resistors influence sound

Post by JMPGuitars »

18 Watt amps have a typical B+ target of 345VDC (+/- 5V). Within that range gives you the ideal tone and dirt. If you go above 350VDC, you get more headroom and less dirt. If you go below 340VDC, you get darker/muddier sound/dirt, and less headroom.

You could make comparisons to this (power amp section only): files/JMPGuitars_18_Watt_Tremolo_TMB_Re ... _Chart.pdf (those are the target voltages I like)

Your 324VDC B+ is about a 6% drop, so consider the relationships based on that when comparing to the chart.

Thanks,
Josh
0 x
'I installed a skylight in my apartment yesterday... The people who live above me are furious.' - Steven Wright

Modern Ground Schemes
Soldering Technique
B+ Voltage Reduction
Amplifier Tools & Parts Info


Web Design: DolceVittoria.com
Guitars / Amps / Effects: JMPGuitars.com
(anti)Social: Facebook · Instagram
Items for Sale

musicheals
Newbie
Newbie
Posts: 45
Joined: Thu 05/13/21 12:08 am

Re: Values of the screen grid resistors influence sound

Post by musicheals »

Great! I will definitely try that and calculate the voltages to my amps voltages. Also I will also try it without the NFB.

THANKS A LOT
1 x

musicheals
Newbie
Newbie
Posts: 45
Joined: Thu 05/13/21 12:08 am

Re: Values of the screen grid resistors influence sound

Post by musicheals »

Here's a short clip I recorded yesterday in the living room. Only a Strat and a cable. Speaker is the G12H. I used a sm57 right into the laptop. The volume was reduced to about 1/2 watt.
I admit the treble is a bit much. Especially today when I practiced with the band. I had to roll back the treble control to 9 o'clock :?
You do not have the required permissions to view the files attached to this post.
0 x

User avatar
zaphod_phil
Builder, Admin
Builder, Admin
Posts: 15208
Joined: Wed 03/19/03 2:00 am
Location: YYZ

Re: Values of the screen grid resistors influence sound

Post by zaphod_phil »

musicheals wrote:
Sat 05/15/21 11:57 am

I admit the treble is a bit much. Especially today when I practiced with the band. I had to roll back the treble control to 9 o'clock :?
Have you tried pointing the mic off-center from the speaker's dust cap? That usually helps tame the treble; although I thought the clip sounded pretty darn fine on my laptop speakers :)
1 x
Nature abhors a clean tube amp

User avatar
Bieworm
Verbose Moderator
Verbose Moderator
Posts: 2287
Joined: Mon 02/10/20 8:24 am
Location: Belgium

Re: Values of the screen grid resistors influence sound

Post by Bieworm »

I don't think it's too bright at all. Sounds pretty nice to me
0 x
"THIS should be played at high volume..preferably in a residential area"

User avatar
zaphod_phil
Builder, Admin
Builder, Admin
Posts: 15208
Joined: Wed 03/19/03 2:00 am
Location: YYZ

Re: Values of the screen grid resistors influence sound

Post by zaphod_phil »

musicheals wrote:
Sat 05/15/21 9:40 am
Yes, I will give it a try without negative feedback....
hurray Then you will get the real deal Marshall 18W sound. NFB tends to make the tone dull, so you lose detail :(
2 x
Nature abhors a clean tube amp

Post Reply