Is anyone here doing modular (or just separate) preamp and power amps?

Forum to discuss amp circuits besides the 18 Watters and their ilk.

Moderators: JMPGuitars, CurtissRobin, colossal, zaphod_phil, Daviedawg, Graydon

Post Reply
cstenger5
Newbie
Newbie
Posts: 74
Joined: Mon 09/06/21 11:44 am

Is anyone here doing modular (or just separate) preamp and power amps?

Post by cstenger5 »

I don't think I really want to pursue building any standalone preamps or power amps at this point, but I'm curious if any of you are doing that. I had an Egnater IE4 back in the day paired up with a stereo tube power amp. I loved feeling of modularity and versatility. I know the world has moved on from the rack mount thing, but I often think in discrete blocks, so envisioning this type of project is interesting to me. I'm sure there are somewhat expensive inefficiencies, considering the need for two PTs, separate chassis', etc. Anyway, just curious, so if you're doing it, I'd love to hear about it.
0 x
Chris Stenger
Stenger Guitars
https://www.instagram.com/stengerguitars/

User avatar
Bieworm
Verbose Moderator
Verbose Moderator
Posts: 2287
Joined: Mon 02/10/20 8:24 am
Location: Belgium

Re: Is anyone here doing modular (or just separate) preamp and power amps?

Post by Bieworm »

Not me... too lazy for multiple devices. I'm a combo man 🙂
2 x
"THIS should be played at high volume..preferably in a residential area"

User avatar
zaphod_phil
Builder, Admin
Builder, Admin
Posts: 15208
Joined: Wed 03/19/03 2:00 am
Location: YYZ

Re: Is anyone here doing modular (or just separate) preamp and power amps?

Post by zaphod_phil »

I think that building preamps and power amps as separate modules is a recipe for noise and hum issues :cry:
3 x
Nature abhors a clean tube amp

User avatar
TriodeLuvr
Frequent poster
Frequent poster
Posts: 616
Joined: Tue 10/16/18 11:19 am

Re: Is anyone here doing modular (or just separate) preamp and power amps?

Post by TriodeLuvr »

I considered that approach before building my amp, but then someone gave me a gutted 12" Peavey combo case. That made the decision. :D I've thought about building a few separates since then, but I don't think there's any benefit. If a combo or head has a good FX loop, it can serve as a separate in an emergency.

Jack
4 x

User avatar
colossal
Moderator
Moderator
Posts: 450
Joined: Thu 05/10/07 2:00 am
Location: Moving through Kashmir

Re: Is anyone here doing modular (or just separate) preamp and power amps?

Post by colossal »

I can see the utility of rack-mounted and modular components, especially if you need lots of sounds, run a studio, or just like variety and flexibility, etc. Rack gear was the rage back in the 80s and I had friends with great sounding, half refrigerator-sized stereo rack setups. I dabbled myself. I had a buddy with a Boogie Triaxis preamp, an Alesis preamp, ADA preamp, Boogie 2:90 stereo power amp, TC 2290 (!), Alesis Quadraverb, Rocktron this and that, all Bradshaw MIDI footswitchable, ad infinitum. Huge, huge sounds in the soaring Steve Lukather vein. Great fun when you are a kid standing in the stereo wash with your hair and pant legs blowing, but in hindsight, way too processed for me now :lol:

These days, my personal interest is about as little as possible between the guitar and the speaker, so I really enjoy the minimalist approach and a very honest, open, and revealing sound.
2 x

cstenger5
Newbie
Newbie
Posts: 74
Joined: Mon 09/06/21 11:44 am

Re: Is anyone here doing modular (or just separate) preamp and power amps?

Post by cstenger5 »

colossal wrote:
Thu 09/30/21 10:47 am

These days, my personal interest is about as little as possible between the guitar and the speaker, so I really enjoy the minimalist approach and a very honest, open, and revealing sound.
same! I even had the Quadroverb :)

I want simplicity, but I also want to hear how this preamp sounds with this power amp, ad infinitum. Again, I don't think I actually want to go down that road, and if I did I could always do it cloesly enough through effects loops.

Still though, all that flexibility I once had was fun.
1 x
Chris Stenger
Stenger Guitars
https://www.instagram.com/stengerguitars/

User avatar
Bieworm
Verbose Moderator
Verbose Moderator
Posts: 2287
Joined: Mon 02/10/20 8:24 am
Location: Belgium

Re: Is anyone here doing modular (or just separate) preamp and power amps?

Post by Bieworm »

the way I remember the late 80's and early 90's and the popularity of those rack units that costed $$$... the more equipment some had, the worse / kitschier they sounded.
Back then I had a Hiwatt custom 100 and an early 70s London City 4x12 G12M loaded cab. That and some Boss FX pedals made me sound 1000x better. Ofcourse transporting that stuff was hell.. but I sounded fat and juicy and noisy.
as a big + I could hang my wet coat over the hiwatt top and dry it while rehearshing ;)
thank god I never got electrocuted doing so.. I was 16 years old..what did I know? hahahaha
those 4x 6550's heated up the practice room.. and the smell I can still imagine! wonderful!
2 x
"THIS should be played at high volume..preferably in a residential area"

geoff 1965
Verbose poster
Verbose poster
Posts: 1118
Joined: Mon 01/04/16 3:52 pm

Re: Is anyone here doing modular (or just separate) preamp and power amps?

Post by geoff 1965 »

Those rack mount Marshall el84’s amps are ridiculous now in price! like Jack mentioned if you had a good effects loop you could plug into the return with a separate preamp I suppose but a dedicated 18W power amp with the touch sensitivity and power tube breakup is a nice concept.
1 x

User avatar
zaphod_phil
Builder, Admin
Builder, Admin
Posts: 15208
Joined: Wed 03/19/03 2:00 am
Location: YYZ

Re: Is anyone here doing modular (or just separate) preamp and power amps?

Post by zaphod_phil »

A customer once brought me an EL84-based Marshall 20/20 stereo rack amp, for repair. It had 420V on the screen grids with only a 100 ohm resistor to protect them. 8O Little wonder it had blown up! I replaced them with 1k resistors, put in new tubes and got the amp working nicely. Not having a rack preamp, I drove the inputs from a boost pedal. The amp had a pleasant warm, clean tone, with no breakup that I could hear. The 20/20 uses negative feedback, in addition to the high voltages, so it was to be expected. Nice, but not a very Marshall sound. :)
3 x
Nature abhors a clean tube amp

Post Reply